Screamin Eagle CVO Models All CVO Bikes 1999 thru present.

2024 cvo

Thread Tools
 
Search this Thread
 
  #11  
Old 06-25-2024 | 12:38 PM
1roadking's Avatar
1roadking
Thread Starter
|
Road Captain
Joined: May 2009
Posts: 500
Likes: 155
From: Moultonborough NH
Default

Thanks for all the input everyone.
 
The following users liked this post:
Clutched (06-25-2024)
  #12  
Old 06-29-2024 | 10:12 PM
Beartooth Rider's Avatar
Beartooth Rider
Supporter
Veteran: Army
Joined: Jun 2014
Posts: 240
Likes: 136
From: Montana
Supporter
Default

Originally Posted by 1roadking
Has anyone gone from a built motor to one of the new CVO’s and felt the power was there.I’m doing more long trips now and thinking about buying a new CVO and doing just a stage 1 type set up to keep it reliable. I’m currently running a 128 and have a lot of valve noise that’s making me question it. I really like the look up the CVO ST but do most of my riding 2 up.
I don't think you'll be disappointed going from a built 128 to a CVO 121 VVT stage 1, The VVT will give you a broad power band and it will run a lot cooler. You will also get better mileage and reliability.

I can appreciate your concerns about possibly being disappointed with the performance of the new 121, I had the same concerns.

I've been riding a 2017 RGS with what started out as an early 107 M8. I upgraded the motor to a FM 124 with a WM8-408 cam, Level A heads, throttle body and injectors making 150/140 (HP/TQ). I also upgraded the suspension with Legends front and rear.

When I compared apples to apples on the dyno charts, my 124 was marginally better than the new 121.

I recently took delivery of a new 2024 CVO Road Glide ST, and I can honestly tell you I don't feel like I'm missing much in the area of performance. The bike is new, and it has been difficult observing the RPM limitations during the break-in period. The dealer did the initial break in for me on the dyno for the first fifty miles, so I didn't need to worry about the 3000 RPM limit, but it was still hard to keep it under 3500. The bike just wants to run! The CVO RGST is geared lower than the other touring models in the transmission and in the final gearing, so it winds up pretty quickly. I'm still being pretty gentle with it, so I haven't wound it out yet, but I can tell it just wants to run! The lower gearing doesn't seem to compromise the fuel economy, but then again, I haven't been winding it out in the higher RPMs either.

We are keeping the 2017 RGS that was built out (30,000 miles on the build) for riding two up. My wife and I love that bike and we'll still enjoy riding it for two up rides, and I'll have the CVO RGST for solo sport riding.

BTW, the CVO RG ST loves to corner!

Good luck with your decision!
 
The following users liked this post:
1roadking (06-30-2024)
  #13  
Old 07-03-2024 | 09:30 AM
Tortoise98's Avatar
Tortoise98
Grand HDF Member
Joined: Mar 2010
Posts: 3,604
Likes: 2,450
From: Central Indiana
Default

It's not just the new CVO's. Both of my CVO bikes have the 122" stage 3 and I have always felt it was plenty of power. I just bought a '24 road glide standard with the 117. It's the first HD I ever bought where i did not immediately feel I needed to do something to the motor.
 
  #14  
Old 07-04-2024 | 04:19 PM
RGCT's Avatar
RGCT
Stage IV
Joined: Feb 2024
Posts: 4
Likes: 4
From: CT
Default

I have 4k miles on my 23.5 CVO. just did trip to canada - lots of torque and pull throughout the range. when I was passing cars, a built 131 RK special that was also on our trip was lagging behind me. love my CVO road glide. putting t-bars and then done. I'll do the bars myself - HD says 7+ hours of labor. crazy.

and the bike runs cool. no heat at all that i've noticed.
 

Last edited by RGCT; 07-04-2024 at 04:21 PM.
The following 4 users liked this post by RGCT:
1roadking (07-04-2024), canadadude (08-22-2024), Clutched (07-06-2024), JAKE 2544 (07-08-2024)
  #15  
Old 07-06-2024 | 08:12 AM
FLSTFI Dave's Avatar
FLSTFI Dave
Seasoned HDF Member
Veteran: Navy
Joined: Nov 2016
Posts: 5,744
Likes: 6,010
From: East TN
Default

Had the 10K service done on Monday. The 23.5 CVO is nice bike, I'm use to riding built bikes, but this stock motor does a pretty good job.
 
The following 2 users liked this post by FLSTFI Dave:
30glock (08-06-2024), Clutched (07-06-2024)
  #16  
Old 07-06-2024 | 01:23 PM
kojak's Avatar
kojak
Grand HDF Member
Joined: Jan 2007
Posts: 4,755
Likes: 2,851
From: Virginia
Default

As I’ve gotten older, hotrodding motors has become less important. I’m fine with my bone stock 2022 cvo rgl. Only thing I’ve done mechanically is Slipons. Just rode 1200 miles in Colorado and Utah and was happy with the bike as it was!
 
The following users liked this post:
RG Pilot (07-06-2024)
  #17  
Old 07-06-2024 | 04:13 PM
RG Pilot's Avatar
RG Pilot
Road Warrior
Joined: Aug 2014
Posts: 1,918
Likes: 301
From: Vancouver, WA
Default

Originally Posted by kojak
As I’ve gotten older, hotrodding motors has become less important. I’m fine with my bone stock 2022 cvo rgl. Only thing I’ve done mechanically is Slipons. Just rode 1200 miles in Colorado and Utah and was happy with the bike as it was!
I agree. My ‘22 is the first Harley I’m leaving completely stock; even the mufflers LOL!
 
  #18  
Old 08-04-2024 | 09:29 PM
1roadking's Avatar
1roadking
Thread Starter
|
Road Captain
Joined: May 2009
Posts: 500
Likes: 155
From: Moultonborough NH
Default

Update, I ended up picking up buying a 2024 CVO Road Glide in Legendary Orange and it’s an amazing bike. The paint job is absolutely stunning In person. The ride, brakes, handling, power and display are way beyond my 2020 CVO Street Glide when it was stock. This motor feels way snappier then the dyno numbers suggest. The bike is really easy to ride very fast. The front end is so tight, planted and controlled. I ended up putting the new RWD RS2 HD shocks on it and they are definitely better than the RS1 shocks on my 2020 which I already loved! Now the upgrades start🤣 I’ve already added Krome Werks 4.5 HP mufflers that sound great, a Harley Davidson sundowner CVO style heated seat, 3/4 inch floor board spacers, tour pack with matched lock and CVO style backrest pad, highway peg mounts and pegs, Freedom Shield 13 inch dark smoke shield, Rockford Fosgate stage 3 rear speakers, Yaffe flush mount plate bracket and passenger floor boards. It never ends, the only thing left to do is remove the cat and get a tune. The OEM power is very good but when a cam upgrade and real tuner become available I might consider upgrading. I really want to keep the linear power of the VVT.
 
The following 2 users liked this post by 1roadking:
Clutched (08-05-2024), ngshop (08-06-2024)
  #19  
Old 08-05-2024 | 07:19 AM
harley_badboy's Avatar
harley_badboy
Road Master
Joined: Apr 2010
Posts: 803
Likes: 17
From: Ontario, Canada
Default

Nice! SHow us some pics.....
 
  #20  
Old 08-06-2024 | 10:45 AM
ngshop's Avatar
ngshop
Road Master
Joined: Apr 2007
Posts: 845
Likes: 177
Default

Photos so I can see if it is a PURDY as my Legendary Orange '24 Road Glide.
 
The following users liked this post:
1roadking (08-08-2024)


Quick Reply: 2024 cvo



All times are GMT -5. The time now is 09:28 PM.