Can high/low beam factory led headlight be programmed to leave the low beam on with the high beam on when you have no running/passing lights. Thank you, JC

 

Sadly no.... The wiring for the Daymaker will not allow it to operate that way. The Switching of Hi/Lo is actually done in the bulb itself.

 

Really? My Daymaker does exactly that. Low stays on when I hit the high.

 

And the switching from Low to High is done in the switch.

 

I think with a reflector you can but with the projector you cannot. There are two different daymakers available.

 

Could be, honestly I'm not sure what one I have

 

Projector looks just like that it has two projectors. A reflector has a bar across the middle and a reflector at the rear of the headlight that dispersed the beam.

The following pic is a projector style.

 

Mine has 3 low beam and 3 high beam all 6 come on in high beam.
But it's also the 5 1/2" not the 7"

 

I noticed yesterday that the fog lamp light on my 2018 Fat Bob was illuminated when the bike was on. I didn't know what it was at first, since it had never come on before. Had to look it up in the owners manual. It would turn off when I turned the high beams on, but once the high beams were off, the fog lamp indicator was back on. However, today the fog lamp indicator suddenly turned back off like it's supposed to be.