Clutch Adjustment
#1
Clutch Adjustment
I start this admitting that I am not a mechanic in any shape or form. But, that said, I was smart enough to buy a manual for my 2000 EG before I started. I had a clutch cable freeze up due to rust (I am assuming) and was able to replace it myself. Put everything back together and took it out for a short trial run and noticed that the clutch engaged without much pressure on the clutch lever at all...maybe a 1/4 " of pull. Then I went out onto the road at highway speeds and discovered the adjustment is really off...too much RPM and the clutch enages.
I need to back it off and I cant seem to find where this is done...the cable adjustment on the cable? The Primary side? The transmission point of connection to the cable?
Any help would be appreciated. I just got the "Fix My Hog" DVD's and was going to go through that but I can't see where it addresses it.
Thanks in advance!!!
I need to back it off and I cant seem to find where this is done...the cable adjustment on the cable? The Primary side? The transmission point of connection to the cable?
Any help would be appreciated. I just got the "Fix My Hog" DVD's and was going to go through that but I can't see where it addresses it.
Thanks in advance!!!
Last edited by ictdog; 11-06-2009 at 08:51 AM.
#2
#3
Primary side, engine cold.
I use this method and generally back mine off a full turn so that the clutch engages closer to the grip.
https://www.hdforums.com/forum/70409-post1.html
I use this method and generally back mine off a full turn so that the clutch engages closer to the grip.
https://www.hdforums.com/forum/70409-post1.html
Thread
Thread Starter
Forum
Replies
Last Post
TRacer
Sportster Models
1
05-24-2011 11:50 AM