I just did my helmet in it, turned out pretty good. I laid 3 coats pretty heavy and then hit it with the heat gun

 

I was thinking about doing my lower fork legs on my DXDXT-DON'T want to disassemble the forks from the fork legs. Looks like I can get away with doing it on the bike? Motorcycle jack and remove the front tire? Never seen this stuff before (That I know of) Does it look cheap up close? Is it reasonably priced? Where do I get it at?

 

I've sprayed my air cleaner cover and regulator cover with it. Thinking about doing my wheels with it instead of powdercoat.

 

Its great stuff been using it for quite awhile, I've used it on my grille, roof, and wheels of my car holds up well.

 

Did grill of my 2010 Ram 6 months ago holds up good as I've put about 20000 miles on it in that time. The good thing about this stuff is if don't like it you can peel it off.

 

hi all is this plastic coat finish shinny or dull and where do you find it does it come in spray can or liquid? interisted to do some trim pices on my sg thanks bud

 

I have been using plasti dip for a few years now, and as people had said before it is all about light coats. I have done anything from Emblems on cars/trucks to motorcycle parts. Trial and error, don't worry about how solid the color looks the first few coats as it will look thin and spotty. Don't rush it just do a little at a time. Dipyourcar.com has a lot of tutorials that show you.

 

Hello all,

So I assume some of you sprayed right over chrome? Did you rough up the chrome at all or just go for it with many light coats.

Thanks,

 

I did my stock air cleaner cover with it,just wiped it down real well with 91% alcohol and sprayed it,looks great.

 

I don't get it. I just tried buffing my bike with beer and it didn't work very well.