bar riser or just back?
#1
bar riser or just back?
Does anyone know of bar risers that just move the bars back with limited rise?
I am short, 5-7 and like the height, but I am reaching, so I would like to just get 'bar-risers' that just come back 1-2".
Can the OEM risers be rotated to come back a little, looks like it?
Thx.
I am short, 5-7 and like the height, but I am reaching, so I would like to just get 'bar-risers' that just come back 1-2".
Can the OEM risers be rotated to come back a little, looks like it?
Thx.
#2
Does anyone know of bar risers that just move the bars back with limited rise?
I am short, 5-7 and like the height, but I am reaching, so I would like to just get 'bar-risers' that just come back 1-2".
Can the OEM risers be rotated to come back a little, looks like it?
Thx.
I am short, 5-7 and like the height, but I am reaching, so I would like to just get 'bar-risers' that just come back 1-2".
Can the OEM risers be rotated to come back a little, looks like it?
Thx.
https://roxspeedfx.com/collections/a...32905171140671
The following 2 users liked this post by FatBob2018:
North of You (10-09-2023),
tri cycle (10-09-2023)
#3
ROX makes a set of rotating risers that they say will pull the handlebar back by up to 2".
https://roxspeedfx.com/collections/a...32905171140671
https://roxspeedfx.com/collections/a...32905171140671
#4
Funny you ask.. I have had the HD Risers for about 2 years and just saw a PA at my local dealer with just what you are asking for. Even with the HD riser I am still leaning forward a little (I am 5’4”). This set was not as high (I could see the bottom of the display) and I did not need to lean forward. After searching the web I think I found them on Amazon. They should arrive on Thursday so I should be able to eyeball them and let you know if they will do the job.
#6
#7
Funny you ask.. I have had the HD Risers for about 2 years and just saw a PA at my local dealer with just what you are asking for. Even with the HD riser I am still leaning forward a little (I am 5’4”). This set was not as high (I could see the bottom of the display) and I did not need to lean forward. After searching the web I think I found them on Amazon. They should arrive on Thursday so I should be able to eyeball them and let you know if they will do the job.
https://www.amazon.com/dp/B0C5ZYJHQ5...roduct_details
https://www.amazon.com/dp/B0C5ZYJHQ5...roduct_details
https://www.a1cycles.net/pan-am-part...rs-2-up-1-back
The following 2 users liked this post by mike448:
Puglia10 (10-12-2023),
TN-Squirrel (10-11-2023)
Trending Topics
#8
found these too:
https://www.wunderlichamerica.com/Pa...ar-Risers-45mm
https://www.helibars.com/helibars-to...n-pan-america/
all go up and back though. my have to just pick my poison. roxspeed may be the only way?
https://www.wunderlichamerica.com/Pa...ar-Risers-45mm
https://www.helibars.com/helibars-to...n-pan-america/
all go up and back though. my have to just pick my poison. roxspeed may be the only way?
#9
I used the A1 risers, top quality and made in the USA, great customer service to boot!
I will give a warning though, the HD wiring is good for 2" up but not 2" up and 1" back (or vice versa). I had a wire pull at full lock, took forever to sort that issue. My dealer wired it with an extension and the issues went away
I will give a warning though, the HD wiring is good for 2" up but not 2" up and 1" back (or vice versa). I had a wire pull at full lock, took forever to sort that issue. My dealer wired it with an extension and the issues went away
#10
I'm guilty of buying some knock-off products for my bike as well, but for anyone that is looking for these and is interested, this is where to get the original made in USA version.
https://www.a1cycles.net/pan-am-part...rs-2-up-1-back
https://www.a1cycles.net/pan-am-part...rs-2-up-1-back