This weekend I added my old TomTom Rider to the bars. The HD app is getting better but I have so many addresses in the TomTom and the 3D directional view is so much easier to watch.
I ran the cable under the plastic tank cowling - just 2 screws to take it off - and rigged up a plug to connect to one of the heating sockets. Very simple.
I used a Ram mount with a 1" ball and a bolt from the Quad kit they do. Same thread as the bar bolts. I'll see how it goes because it's a bit low and will take my eyes off the road. Maybe should be more at eye height.
I left enough wire to move it around to attach to the clutch bolts if necessary.
TomTom on Ram mount TomTom on Ram mount 1" Ram ball from Quad kit Cable runs under the plastic tank cowling up to the heat sockets
Re Custom setting for suspension problem. Just set one up so I'll see how that goes.
And it works ! I set up a copy of the basic ride mode and chose the Comfort setting for the suspension. Hasn't dropped yet.
I'll set up another for the Sport mode to see if that follows too.
You can also force it into preload setting you want instead of letting it sense and decide. I'm glad others are having the same luck I've had with the custom suspension setups.
This weekend I added my old TomTom Rider to the bars. The HD app is getting better but I have so many addresses in the TomTom and the 3D directional view is so much easier to watch.
I ran the cable under the plastic tank cowling - just 2 screws to take it off - and rigged up a plug to connect to one of the heating sockets. Very simple.
I used a Ram mount with a 1" ball and a bolt from the Quad kit they do. Same thread as the bar bolts. I'll see how it goes because it's a bit low and will take my eyes off the road. Maybe should be more at eye height.
I left enough wire to move it around to attach to the clutch bolts if necessary.
TomTom on Ram mount TomTom on Ram mount 1" Ram ball from Quad kit Cable runs under the plastic tank cowling up to the heat sockets
Booked my 1k service and installed my ride bell, I’ve got a nice little trip to Ypres for the Remembrance Ceremony next month so looking forward to that although jumping through the COVID travel requirements is a bit of a pain.
10-27-2021 | 12:05 PM
