Oil line configuration help
#1
03-05-2007, 07:29 PM
Oil line configuration help
Oil tank configuration is as follows
FEED VENT RETURN
DRAIN
The return inlet has an internal line that sends the oil to the opposite side of the tank so the oil has a chance to cool down before returning back to the engine.
My question is what goes where , it’s a shovel Generator 67 Engine
Please look at the attached photo (S&S OILPUMP)
Example A= RETURN
Also I have a remote oil filter whichPIPE goes where , any help on this matter will be greatly appreciated. Next time I will take notice of the original setup before I start to customize !!!!
[IMG]local://upfiles/8079/D9165F6637424DE6B1AFA88772B7A332.jpg[/IMG]
FEED VENT RETURN
DRAIN
The return inlet has an internal line that sends the oil to the opposite side of the tank so the oil has a chance to cool down before returning back to the engine.
My question is what goes where , it’s a shovel Generator 67 Engine
Please look at the attached photo (S&S OILPUMP)
Example A= RETURN
Also I have a remote oil filter whichPIPE goes where , any help on this matter will be greatly appreciated. Next time I will take notice of the original setup before I start to customize !!!!
[IMG]local://upfiles/8079/D9165F6637424DE6B1AFA88772B7A332.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
