DIY Scavenger Puck under $10.00
#51
I made this scavenger out of a remote oil filter mount and a couple of fittings from the junk drawer.
I used an addition filter gasket so the outside fitting ws oriented at the bottom when the unit is screwed on. Works great. $12 total investment not counting a piece of clear dump hose.
I used an addition filter gasket so the outside fitting ws oriented at the bottom when the unit is screwed on. Works great. $12 total investment not counting a piece of clear dump hose.
#53
Be careful here...
The EVO lube system is a completely different configuration than the TC or M8 Lube system.
Using an Evo type scavenger on TC or M8 would not be good...
The EVO lube system is a completely different configuration than the TC or M8 Lube system.
Using an Evo type scavenger on TC or M8 would not be good...
Thread
Thread Starter
Forum
Replies
Last Post
thend
General Harley Davidson Chat
35
07-15-2017 12:07 PM