DIY Scavenger Puck under $10.00
#51
12-30-2019, 05:21 PM
Seasoned HDF Member
I made this scavenger out of a remote oil filter mount and a couple of fittings from the junk drawer.
I used an addition filter gasket so the outside fitting ws oriented at the bottom when the unit is screwed on. Works great. $12 total investment not counting a piece of clear dump hose.
I used an addition filter gasket so the outside fitting ws oriented at the bottom when the unit is screwed on. Works great. $12 total investment not counting a piece of clear dump hose.
#53
06-15-2020, 11:41 AM
Be careful here...
The EVO lube system is a completely different configuration than the TC or M8 Lube system.
Using an Evo type scavenger on TC or M8 would not be good...
The EVO lube system is a completely different configuration than the TC or M8 Lube system.
Using an Evo type scavenger on TC or M8 would not be good...
#55
06-16-2020, 06:59 AM
Thread
Thread Starter
Forum
Replies
Last Post
thend
General Harley Davidson Chat
35
07-15-2017 12:07 PM
