View Poll Results: A poll
Voters: 3641. You may not vote on this poll
What Brand Oil Filter Do You Use
#471
What Brand Oil Filter Do You Use
I was using the k&n filters from O'Reillys ($9) but I could never seem to get them of with out a problem. The part where you put the socket on the K&N one will snap of when you try to remove it. Then I have to poke a hole in it and spin it of with a screwdriver.
Lately I have just been using the black Harley filters. Only $6 bucks at the local dealership.
Lately I have just been using the black Harley filters. Only $6 bucks at the local dealership.
The following users liked this post:
WiSeNhEiMeR (07-06-2018)
#475
Who taught you that? That's way too tight. You hand tighten to seat the rings and then hand tighten further no more than1/2 to 3/4 turn. No wrench used on installations.
The following users liked this post:
WiSeNhEiMeR (07-06-2018)
#477
What Brand Oil Filter Do You Use
If you are hand tightening than adding a full turn with a wrench you are over tightening the filter.
The following users liked this post:
WiSeNhEiMeR (07-06-2018)
#479
Heck, I think I paid only about $16 for the Amsoil EOM filter. Now running a ss screen cleanable tho, so no more buying them.
I use a piece of 1" pipe (closet rod) with 2 slits in one end and a long bolt thru the other, a foot of ratchet strap tucked into the slits. Sling strap umder the filter and turn the bolt in the desired direction: the best filter tool you can make.
I use a piece of 1" pipe (closet rod) with 2 slits in one end and a long bolt thru the other, a foot of ratchet strap tucked into the slits. Sling strap umder the filter and turn the bolt in the desired direction: the best filter tool you can make.
#480
oil filter
I think a lot of guys don't change their own oil, I know most of those I used to ride with Only two of us did. I switch to KN because I like the nut on the top which makes it easy to remove and I don't do chrome any more, who the hell sees them anyways!!!