2014 Street Glide "Ultra"
#1
2014 Street Glide "Ultra" ***updated 20150615***
Well, all that I need to do is install the rear speakers.... I have them,but need to bring some tools down to cali next week when I go visit my folks.
Just installed the lowers, Custom Dynamics LED's front and rear with smoked lenses, the color matched fairing under the headlight, black transmission top cover, and a gremlin bell that a friend got me. works or not... its a hand grenade, so its all good!
Once the work was all done, I took a ride to Vegas, Havasu, and Yuma. Needed to make up for some of the miles that I missed while in Japan.
Just installed the lowers, Custom Dynamics LED's front and rear with smoked lenses, the color matched fairing under the headlight, black transmission top cover, and a gremlin bell that a friend got me. works or not... its a hand grenade, so its all good!
Once the work was all done, I took a ride to Vegas, Havasu, and Yuma. Needed to make up for some of the miles that I missed while in Japan.
Last edited by Seventy4blazer; 06-15-2015 at 05:52 PM.
The following users liked this post:
RossW (12-20-2019)
#3
#5
the biggest reason I went with a Street Glide was the lower financed amount. I am too impatient to save money up. Also,I didn't want the two tone paint. In the end, the "ugly" fenders on the ultra and limited would have been replaced anyway, but then I would still have to paint the tank, fairing, and side covers.
#7
Gorgeous bike.
Going the same route with my SGS.
Replaced all the lights with LED's.
King Tour Pack.
New seat for 2-up (need to send to MCC for improved ride).
Just installed the saddlebag guards - went with aftermarket 1-1/4" - looks great.
Now to turn some of the chrome to black.
Enjoy your ride and good luck with the move.
Myron
Going the same route with my SGS.
Replaced all the lights with LED's.
King Tour Pack.
New seat for 2-up (need to send to MCC for improved ride).
Just installed the saddlebag guards - went with aftermarket 1-1/4" - looks great.
Now to turn some of the chrome to black.
Enjoy your ride and good luck with the move.
Myron
Trending Topics
#9
The kit for the added TP is quick disconnect. Have to drill 6 holes for screws (I think that they are 5/16"... ) and two 2.5" holes for the air to move into the TP as the speakers function.
the wire harness has a connector on it and "breaks" near the rear seat. Just have to get the radio flashed at the dealer to turn on the 4 speaker setup.