Set of 96" cylinders and pistons off my '09 Electraglide Standard with about 20k miles. Natural finish. Good for 103/107 bore. $75 shipped

 

Or to bore to 95 inches for a TC88; right?

 

Yes 95/98 bore for 88.

 

Nope they aren't. These aren't the same. A 96 twincam is different stroke. You would need 103 take offs

 

While the bores and strokes are different (96 is stroked 88, 103 is bored 96, 88 and 96 have same bore as do 95 and 103), the jugs/cylinders are the same for all 88-107 twincams (except "all-bore" 107). The pistons have different pin heights depending on stroke. These cylinders will fit both 88, 96 and 103 twincams. They can be bored up to 98 with 88 stroke or 107 with 96/103 stroke.

 

Wrong

 

What he said is this ^ and if he wants it for a 95 then no they don't. I was answering his question and not saying yes they will but you would have to do this. I agree with what you are saying above but that's not what he asked

 

Those jugs fit a TC88 or a TC96.

They can be bored to 95, 98 or 103 depending on whether you have an 88 or a 96 to start with. The bore right now at 96 inches is the exact same diameter as the 88. Stroke is the only difference between the two.

When you have to explain how you're right; you're probably wrong.

To the top.

 

Ohhhh. My bad. Now I get it

 

Now, would someone please buy them. Thanks