I am listing this for a very good friend of mine. He has put a lot of time, thought and money into making this a very nice custom bike. All work was done by the dealership. Les (the owner of the bike) knows and understands his own mechanical skills and abilities and sought out what he considered the best "wrench" (Lane Dyke) at Elk Grove HD to help him with this. When Elk Grove closed shop, Lane moved on and is currently working in Colorado for an authorized HD dealership.

He is not selling this bike because he wants to, it is because he has to. He has spent the last several years putting together what he believed would be the last bike he would ever own. But nobody said life was fair…enough said.

He purchased the bike new from Harley Davidson of Elk Grove, CA on 04/18/2006 for a cash price of $20,913.00. (Current KBB is $14,500…and "yes" I understand that KBB is a "guide" to pricing.)

As soon as the ink dried on the paper, he picked up the accessory catalog and started planning what changes he would be making. What follows is a short and long list of what has been done. Wherever he could, only HD parts and accessories were used. He has receipts for all the parts/accessories purchased and all work done. There are no parts that he took off included or available for sale.

The bike has been serviced at the required intervals according to MoCo guidelines. He is using Amsoil 20-50 in all holes. The bike has never been dropped, down or otherwise damaged in any way. It has never seen anything but California (and a wee bit of Arizona) sunshine. It has always been garaged, meticulously maintained and when not being ridden, it has been on a trickle charger.

The paint is the stock factory color…two tone Glacier White Pearl and Deep Cobalt.

The title for the bike is in his name and in his possession.

The bike has just about 17,950 miles on it.

The asking price it $31,200. Yes, it is not cheap but if you price out the parts listed (none of this includes all the little parts that all add up and are necessary to make it happen), add labor (take a look at the short list and then go to the long list) and you will see that it is a reasonable request. (And "yes", I have looked at/ added up receipts, and it is far above his asking price!) There is room for negotiation and counter-offers, but please, no ridiculous and insulting "low-ball" offers.

When he had the motor upgraded in 2007, he purchased an extended warranty that will expire in 2013. The cost was an additional $1,400.00. If you choose, you may purchase this transferable warranty for $400.00. This price is "non-negotiable" and is exclusive of and in addition to the agreed upon sales price of the bike.

The "short" list of what has been done/added/changed/upgraded:

• Big Bore Screaming Eagle heads, 1550 conversion kit, S&S 570G cams w/ 4 gear-to-gear cam chest and race tuner, Diamond Cut heads and cylinders, flat top pistons, compression release in heads, quick-install pushrods, Big Shot staggered exhaust;
• Upgraded wheels, completely chromed front end;
• Chrome brake related components;
• Stainless braided lines;
• Chrome shift linkage and primary related components;
• Handlebars changed out and chromed components added (switches, clamps and levers);
• Transmission is stock, five-gear (was on the next "to-do" list);
• The bike is fuel injected;
• The bike was dyno-tuned as performance upgrades were made and the HD S/E race tuner is included in the sale of the bike;
• 24T comp sprocket/37T clutch basket;
• Speedo/tach combo kit;
• Passing lamp kit and housing;
• Whenever, wherever possible chrome fasteners were used along with chrome nuts, washers;


Please Note: I have tried to be as careful and accurate as possible in describing this bike. If you notice a glaring discrepancy, notify me and I will gladly post an addendum with your information.

Couple of photos...









MORE BIKE PHOTOS CLICK HERE
http://s1113.photobucket.com/albums/...006%20Softail/

If you have any questions, you may contact Les (the owner) at (916) 496-0407 or through his email: thres4@yahoo.com. If you wish to view the bike or have someone look at the bike in your stead, arrangements can be made for that as well.

Thanks for looking,

Dave


The "long" list of parts and accessories:


MOTOR/TRANSMISSION

16546-99 1550 conversion kit
16952-06 Cylinder head kit
17997-99A Quick install pushrod kit
2007-2570 S&S 570G cam w/ 4 gears
22851-99A 1550 flat top piston kit
32076-04 Compression release kit
32107-01G EFI race tuner kit
32532-01 Timer cover, Billet 1550
33760-98A Shifter kit linkage
37846-99A 37T clutch shell
40269-85A 24T transmission sprocket
43894-04 Head bolt covers
43911-95 Head bolt bar kit17997-99A
60639-00 Kit, inner primary
62896-00B Oil dipstick temp w/ gauge kit
74610-01 Chrome voltage regulator kit
94058-03 Cam cover chrome hardware
94059-03 Rocker box chrome hardware
94068-03 Lifter block chrome hardware
DS175015 Motor case chrome hardware
DS175017 M/M bolt kit 01-06 softail
V17907 Big Shot staggered exhaust
Diamond Cut LLC Diamond cut heads and cylinders


WHEELS/BRAKES/FRONT AND REAR END

40447-01 Sprocket kit, slotted, 6-spoke, rear
41583-03 FLSTF wheel spacers
41596-00 Chrome wheel spacer kit
42678-05A Brake pad pedal kit
43011-05 Front laced wheel
43014-05 Rear laced wheel
43889-86A Chrome front axle nut cover
44395-00A Chrome caliper kit, front
44539-02A Chrome caliper kit, rear
44647-05 Chrome brake rotor hardware, rear
44803-00B SS brake line kit
45047-06 Rear brake disc kit
45075-96 Chrome hand lever kit
45118-06 Brake disc kit, slotted. 6-spoke, front
45355-06 Chrome kit, master cylinder
45813-03 Chrome axle cap nut kit
45963-97 Fork slider covers
46129-98B Fork nut cap cover kit
46482-00 Chrome fork slider kit
46646-05 Chrome brake rotor hardware, front
48112-00 Axle cover kit
66441-05 Kit, chrome fork slider covers
70222-96A Chrome switch housing
GWP-80-147 Disc brake caliper mount
GWP-80-147 Disc brake caliper mount


BARS/SWITCHES/CABLES/LIGHTING

29510-05 Chrome back plate kit
343-01SC+2 SS CC throttle cable
343-01SC+2 SSCC idle cable
42640-00 Brake lever kit, Billet 2000
495045 Chubby RK II bar
56425-02 Hand grip kit
56541-86A Handlebar clamp, lower left
56542-86A Handlebar clamp, lower right
58092-05 Light bar/spot lamp/turn signal bracket
64108-03 Billet clutch cable
68719-05 Chrome spot light housing
69732-05 Visor bezel passing lamps
69734-05 Visor bezel, 7" headlamp
69758-05 Bullet T/S w/ visor
69759-05 Bullet T/S w/visor
74556-04 Nostalgic gauge kit (w/ tach)
74661-04 Visor gauge bezel
91124-03A Switch housing hardware kit
91252-03 Billet cable clamp kit
92006-05 Brake line kit


FRAME AND CHASSIS

496682 License plate frame w/ 6" LED light
34601-02 Shifter peg kit
50305-02 Foot peg kit, aileron
50363-05 Footboard insert kit
51693-06 Sidekick seat, FLST
59360-05 Skirt, front fender trim
60316-00A Chrome belt guard kit
DS 270121 License plate side mount
DS720814 Fender license plate mount
Re-paint rear fender (due to lic. plate frame re-location)
Re-chrome tail light housing (due to modified lic, plate mount)


MISCELLANEOUS

• Chrome nuts (allenheads where it was possible), bolts, screws, washers, lock washers were used just about everywhere possible without completely disassembling the bike
• Dyno Tune 05/10/06: Max power = 74.7/Max Torque = 77.5 (spec. sheet inc.)
• Dyno Tune 03/23/07: Max power = 99.6/Max Torque = 100.1 (spec. sheet inc)