SOLD: 1990 FXRS | fully custom built & modified performance bike
#1
SOLD: 1990 FXRS | fully custom built & modified performance bike
1990 Harley Davidson FXRS
---
---
this is a true frame off build. every thing is freshly powder coated, nickel, or chrome plated, and every single bolt on the bike is ARP 12-point stainless hardware. full custom wiring harness, controls, gauges, master cylinders, etc. nothing is stock but the tank, frame, and rear fender!
price is FIRM at $32,500...this bike has over $40k into it.
please examine the mod list and understand the price and the value.
ZERO expense was spared. this bike is top tier. you cannot a build a better one...every single part is new/custom/high-end best of the best. only letting this go so I can get back into a bagger.
---
---
Drivetrain:
Suspension:
Brakes:
Other:
---
FXR FXRP FXRT Dyna Sporty wheelie chopper hog HD
---
---
this is a true frame off build. every thing is freshly powder coated, nickel, or chrome plated, and every single bolt on the bike is ARP 12-point stainless hardware. full custom wiring harness, controls, gauges, master cylinders, etc. nothing is stock but the tank, frame, and rear fender!
price is FIRM at $32,500...this bike has over $40k into it.
please examine the mod list and understand the price and the value.
ZERO expense was spared. this bike is top tier. you cannot a build a better one...every single part is new/custom/high-end best of the best. only letting this go so I can get back into a bagger.
---
---
Drivetrain:
- S&S 107V motor
- S&S Super E Carb
- Speed Dealer solid brass choke pull
- Complete Baker OD 6-Speed transmission with Hydraulic Clutch
- SPF stainless exhaust with race muffler and full custom polish
Suspension:
- Ohlins inverted Dynamoto front end
- Ohlins piggy back rear shocks
- Kraus Triple trees
- GPR V4 steering stabilizer w/custom frame mount & top clamp
Brakes:
- Beringer brake and hydraulic clutch hand controls
- Brembo radial monbloc calipers front and rear with Ferodo ST brake pads
- Braketech rotors front and rear
- Brembo rear master brake cylinder
- Custom stainless steel braided brake lines
- Kraus front and rear caliper mounts
Other:
- ARP hardware on entire bike
- Trac Dynamics swingarm
- Moon’s LED headlight and taillight
- Saddlemen 2-up seat w/gold diamond stitching
- Instantly removable Kuryakyn sissy bar w/matching Saddlemen pad
- Leather pro’s V2 saddlebags with custom one-off matching Saddlemen lids
- Carbon Fiber front fender, side covers, dash, and rear brake fluid mount
- Vintage CCI wheels by PM fully rebuilt, rebuilt, ARP bolts, and custom nickel plating
- Pirelli MT66 Route
- Screamin Eagle spark plugs
- HD sporty pegs F&R
- One-off first release Hammerhead Designs spring loaded aluminum race brake and shifter levers
- Memphis shades fairing w/12” dark smoked windshield
- Boosted Brad 10” destroyer risers
- Big Al’s mid bend bar
- Custom aluminum skid plate
- Chrome air cleaner and points cover
- Lay-Down license plate
- Motogadget hand controls/switches w/mirror mount clamps
- Motogadget M-Switch mini push button unit (2)
- Motogadget keyless ignition (inside custom carbon dash)
- Motogadget M-Unit controller with custom wiring harness
- S&S single fire ignition
- Koso digital gauge
- Fresh powder on everything, including bike frame
- Performance machine gas caps
- Performance machine grips
- Tank is original paint with hand painted artist drawing from 1991 Daytona bike week
- Faring, skid plate, front fender, side covers, and rear fender painted and pinstriped to match original tank
- Custom bar bag that converts to backpack/sling
- Zipper’s Performance Chain Drive conversion
- Barnett Clutch
- Glide-Pro stabilizing motor mounts
- Single cable throttle wire with harley throttle housing
- Pingel max flow fuel valve
---
FXR FXRP FXRT Dyna Sporty wheelie chopper hog HD
#3
#4
Thread
Thread Starter
Forum
Replies
Last Post