Hydraulic clutch for 2021+
#1
#2
The following users liked this post:
talkingrock (06-29-2022)
#3
The following 2 users liked this post by gonemad:
BrandonSmith (06-30-2022),
Psyclesam (07-24-2022)
#5
I need to switch to a hydraulic clutch because I ride with 18" apes and a windshield. The clutch cable requires that I keep the bars back or the cable both binds and gets tore up by the windshield. Due to an injury I need the bars moved up, therefore, I need a hydraulic clutch so the line can be tucked against the bar thus giving me the extra room to move the bars closer too the shield.
The following users liked this post:
M Oclaf (06-30-2022)
#6
Except for at HD. They went back to cable and the first thing they did was screw it up withcheap plastic parts then did not need anyway.
The following 2 users liked this post by smitty901:
talkingrock (06-29-2022),
tngarren (06-29-2022)
#7
I really like how easy it adjusts. Lift up the cover. Pull the clip. Adjust the cable as desired. Put the clip back in. Lower the cover. Done. Only tool required was a needle-nose to pull the clip.
Time will tell how the plastic parts hold up.
I believe there are already metal aftermarket replacement parts either for those who have broken their plastic adjuster or assume it will break and want to prevent the possibility of failure.
Bob
Trending Topics
#8
There is no kit from Harley, but you can buy the parts from them. You're looking at about $800. I don't have time right now, but maybe tomorrow I can put the part numbers together for you.
The following users liked this post:
M Oclaf (06-30-2022)
#9
Please include a Muller in that, instead of the HD slave, it is ****.
#10
FBInc. EZ Clutch Adjuster Upgrade Kit for 2021 and Earlier Touring and 2018 and Later M8 Softails, OR 2022 Touring Models — FXR Division