Spark plug boot tool
02-08-2018, 04:15 PM
Grand HDF Member
Thread Starter
Join Date: Dec 2017
Location: Plover, WI
Posts: 4,502
Spark plug boot tool
Anyone using one of these for spark plug boot removal with tank off?
02-08-2018, 08:24 PM
Join Date: Nov 2013
Location: SW Washington State
Posts: 3,803
This is the tool supplied by the MoCo to the dealers. Its the one I use
Last edited by sixguns; 02-08-2018 at 08:27 PM .
02-09-2018, 07:23 AM
Grand HDF Member
Thread Starter
Join Date: Dec 2017
Location: Plover, WI
Posts: 4,502
Thanks sixguns. I'm looking for feedback on the alternatives that are available.
02-09-2018, 07:43 AM
Join Date: Jan 2017
Location: Wichita
Posts: 348
Quote:
Originally Posted by
sixguns
This is the tool supplied by the MoCo to the dealers. Its the one I use
Does it work on the two cylinders under the tank, have you tried it ,Thanks
02-09-2018, 09:46 AM
Join Date: Nov 2010
Location: Simi Valley, CA
Posts: 3,845
My fingers have served me well to remove spark plug boots for over 50 years.
The following 2 users liked this post by 2black1s:
02-09-2018, 05:11 PM
Join Date: Mar 2012
Location: Connecticut
Posts: 117
Quote:
Originally Posted by
2black1s
My fingers have served me well to remove spark plug boots for over 50 years.
Me too but the two plug wires located under tank are recessed into the rocker cover and were pretty tough to pull straight out.
02-09-2018, 09:43 PM
Join Date: Nov 2010
Location: Lansdale Pa.
Posts: 377
Gonna try Lisle Tool 51750 Adjustable Engine Spark Plug Wire Puller . I had a hard time pulling those off as well . Can they make it any harder to change plugs ?
02-10-2018, 05:20 AM
Join Date: Jul 2011
Location: dunedin, fl
Posts: 483
Likes: 0
plugs
how often u guys changing plugs on m8? how many miles, doesnt the book say 30k?
02-10-2018, 05:34 AM
Join Date: Jul 2017
Location: Ky
Posts: 3,191
Put some silicone lubricant on there when you reassemble for easy removal next time. And anti seize on spark plug threads
02-10-2018, 07:05 AM
Join Date: Nov 2013
Location: SW Washington State
Posts: 3,803
Quote:
Originally Posted by
blacktop37
Does it work on the two cylinders under the tank, have you tried it ,Thanks
Yes, its all in the angle,and they fit great down into the recess.
Spark plug boot tool
02-09-2018, 07:43 AM
