Anyone doing the breather bypass on your M8?
The following users liked this post:
iHodor (04-02-2021)
#632
Same here. I have two hoses coming out of the back of the Ventilator which I route down and then back along the frame where I point them down just in front of the swingarm. No muss no fuss. I also keep my oil level at half a quart low according to the stick, hot.
#634
I never understood the whole breather filter thing either. There are one way valves in the head breather, air only travels one way through the valves.....out. Just something else to get caked with crap.
#636
Depends on what you mean by "this" biggins. If you scroll back through this thread you'll find 3 versions of what I did with my ventilator. The most recent is what I'm running with now. It's pictured in Post #580. No catch can, no fittings, just rubber fuel line running off the breather bolts out the back, down to the frame and then alongside the frame to the swingarm where I dumped them toward the ground. Prior to that I tried a couple of different versions with the catch can but didn't like either.
Last edited by iHodor; 04-05-2021 at 09:10 PM.
#637
There's a bunch of examples and designs of Ventilator AC's being vented in this thread:
https://www.hdforums.com/forum/milwa...n-your-m8.html
https://www.hdforums.com/forum/milwa...n-your-m8.html
#638
The following users liked this post:
Ddieselsmoke (04-11-2021)
#639
#640
Trask checkM8
Just installed the Trask cover today, it’s really not a bad job as long as you have a mini ratchet, and I know I’m deluding myself but I swear it’s got a little more pep.
and I ran the filter down under my bike as well, wait and see if there’s any oil dripping but I don’t expect any when I pulled the transmission cover there wasn’t really any oil on it.
and I ran the filter down under my bike as well, wait and see if there’s any oil dripping but I don’t expect any when I pulled the transmission cover there wasn’t really any oil on it.