ironhead 77 or 79 custom build
#1
ironhead 77 or 79 custom build
started out like this
clutch had a problem so we took it out and change the whole thing
stripped her bare
started to mock up her tail end
then we tripped her totally bare!
and we found out that the neck wasnt aligned! i think the previous owner had a fall or something
we make a make shift jig for her just to fix her up loose the weld on the top tube to the cast iron neck and hammered the down tube a bit and used a laser to check it was straight but not perfect though but tolerable
clutch had a problem so we took it out and change the whole thing
stripped her bare
started to mock up her tail end
then we tripped her totally bare!
and we found out that the neck wasnt aligned! i think the previous owner had a fall or something
we make a make shift jig for her just to fix her up loose the weld on the top tube to the cast iron neck and hammered the down tube a bit and used a laser to check it was straight but not perfect though but tolerable
#7