Split second loss of power, drops a cylinder.
#1
Split second loss of power, drops a cylinder.
Searched and read, nothing quite like this or mentioned in the trouble shooting guides. just started yesterday and got a p0562 code. 2004 efi road king with 17k miles.
Riding on the highway and had a split second loss of power. Came back up but only ran on one cylinder, wante to stall wham I got to stop sign/light. Stopped the bike, restarted, ran fine for a bit.
It has since done this several more times (primary transportation) over the day. It appears that when it does this if I turn off the run switch and turn it back on both cylinders go back to firing. My Westach gauges say I'm getting just over 14v around 2000 rpm, so don't think it's the strator.
Any ideas? Picking up a multimeter today to confirm. Cleared the code but I'm pretty sure it's going to throw the same one when it does it again.
Thanks
Riding on the highway and had a split second loss of power. Came back up but only ran on one cylinder, wante to stall wham I got to stop sign/light. Stopped the bike, restarted, ran fine for a bit.
It has since done this several more times (primary transportation) over the day. It appears that when it does this if I turn off the run switch and turn it back on both cylinders go back to firing. My Westach gauges say I'm getting just over 14v around 2000 rpm, so don't think it's the strator.
Any ideas? Picking up a multimeter today to confirm. Cleared the code but I'm pretty sure it's going to throw the same one when it does it again.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post