Recently noticed the engine light would come on, shut off, then come back on for a short time and shut off again.

This told me I has a historical code, which I pulled tonight. Got P1353.
Cleared it, went for a ride, checked codes, nada.

I can't find any info on P1353. Any help would be appreciated.

Bocifus

 

I would not be that concerned since it is a historic code, and it is not causing any problems. Harleys will throw codes if you do not complete a starting sequence. It may have just been a burp.

 

Thanks, was not real concerned, as it is running very well. Was curious about the code's meaning. I've cleared it and so far it has not returned.

Ride safe,

Casey

 

Well the code did come back and it is p1353. Turns out the culprit was one of the Pulstar plugs. Did some trouble shooting Saturday and found the front plug defective. Replaced both with SE plugs. Rode all day today, twisties thru the canyon and high speed on the freeway. Never once set any codes. Apparently my bike does not like the Pulstars. The Pulstar plug I pulled from the front head had more wear on its electrode than the one I pulled from the rear head. I'll stick with conventional plugs,

Bocifus