Here where i'm at. remeber only have slip ons and se intake. Did 8 smart tune rides. Cells filled in pretty good. Did smart tune with all 8records. Then ichanged afr at idle to 13.0 and idle rpm to 976. Run bike at idle for 20mins temp just keep climbing to 320. Turned off bike. Outside air temp 70. Quetion will I never be able to hold a temp at idle? And is 20mins from a 70 engine temp to 320 engine temp normal for a 70 degree day?

 

A non-moving air-cooled engine is going to get very hot. Running your bike at idle for 20 mins is definitely not a good idea. I'd think it could even cook and seize.

 

So another words my adjustments are probly fine. Did know if a stock set up would heat up as fast. Well I drive it tomorrow and se what it does for runnig temp'. it was in the 280s at 70out side temp

 

One more thought may not be a good idea but you never know when you get stuck in a traffic jam on a90 dregee day.

 

if you datalog or smarttune you will be able to see temp differences at different speeds. Idling for long in slow or static traffic is not a good idea. I turn off my motor at bridge openings queues you no it going to be a while before moving

 

Hey buch
Seen what you have there for set up, you mind posting your afr and clb tables. Also what kind of temps you running?

 

I not get this print screen to coperate here. Am running in european values. i've tossed in a s&s 583easy start cam. afr from 12.7-14.0

 

I ordered the fuel moto 107 kit today, my question is are there maps for this kit? I currently have an 09 Ultra, fuel moto air cleaner, Rinehart slip ons, and a Super Tuner. The kit is coming with the 555 cams, I am going to use stock heads for now.

Thanks for the help, I asked this question before but didn't have all the information last time.

 

You won't find a canned map for this. Harley only provide maps for stock and SE parts.

Couple of choices...Get it dyno tuned. I think this your best bet with your hardware. Or you could try to find a close HD map and do some Smart Tune sessions to bed it in.

 

When I first connected my SEPST to my bike I forgot to save the stock map. Does anyone have a stock base map for a 103ci Ultra?

Thanks