OK, looks like I get to ask the dumb question of the month. I've read back to try to find the answer to no avail. I have a 2014 FLHTK twin cooled. All the aftermarket parts sellers (denniskirk/jpcycles) say that P/N 9225 TTS Mastertune won't "fit". Did online chat with Kuryakyn and they said it would. Don't really care to get a part that wont work and furthermore, one that isn't ready to flash that twin cooled motor. Any advice?

 

Here are the part numbers.

http://www.mastertune.net/harleydavidson.htm

2000008

 

My final tune - https://www.dropbox.com/s/99eqejinvq...0setup-007.MT8

My last Vtune recording - https://www.dropbox.com/s/wqeqm3b07w...neData-005.DM3

Still cranks over a lot before firing when it gets warm. Any suggestions?

Thanks for all the great info here.

 

Have you tried going the opposite way with your cranking fuel?

 

9225 is the same as part # 2000008 so yes it will work. you will also need cable kit 9229 from kuryakyn.

TTS part #s are 2000008 for the device and 2000011A for the cable kit.

denniskirk, jpcycles, etc. all sell the TTS part #s, Kuryakyn is the only one that slaps their own part number on the product.

 

For everyone's information.
I spoke with Vicki at TTS yesterday. Vicki told me that at the present time there are no plans for an exchange program to upgrade the Black VCI to the Blue VCI. This has been discussed, but no decision has been made yet. I advised her that I would post this on the board to avoid phone calls to TTS in regards to this matter. We will all know when and if any exchange program becomes reality.

Nutz,
On the way tomorrow.

 

Kurt man I'm sorry. I'm not able to get data out of this file at all. Just realized this is a map for a destroyer.. If not mistaken you have to have VERY OLD SERT software or maybe even a destroyer specific application to get this data out of here.

 

Kurt you don't have PM's active so I can't send you one, send me a PM with your email address, I think I can help you out with the mt6 file.

 

if you are able to help him, let us know how you did it please. this is not a typical mt6 file in respect that it's for a destroyer and everything I read after not being able to open this file with any version of SE or TTS related software leads me to believe this was created with an application specific to the destroyer. I've seen several mentions of the destroyer software as well but never nailed down the name of it.

 

M3.. the old V 477 software will not open it. Both Nutz and I tried today.

I was able to get a MT6 from a VRod site and it opened fine. Don't know if his file is corrupted but it sure won't open. Says, needs software for HD-V127-Destroyer.