TTS Mastertune Information
#2971
If you use MT8 and fail to save your stock ecm cal you can not reload a stock cal back into the ecm if you did not save it in the first place. Like wurk truk said that is not a problem if you are not going back to stock ever. If however you decide you need to go back to stock for some reason if you did not first save your stock cal you are out of luck.
#2974
Most others have found just adjusting the VE's help a lot. And once that's done, the other tables get the bike even closer to a more efficient/better running/performing bike.
#2975
Looking for help w/ a TTS issue I'm running into
I finally got a mount for my iPhone so I could have a remote view of my computer screen while doing vtune runs. Yesterday was my first time out w/ the setup and something extremely annoying happened over and over and I've posted on other forums and haven't found an answer yet. While recording data, datamaster would freeze up and stop recording for a period of time and it always froze up when the data points were on a number like 5100, 5500, 6100 meaning whatever number it froze on had "00" as the last two digits. I'm not sure what's causing the issue if it's the iPhone RDP I'm using or if it's the computer.
1. Laptop is in a backpack on my back so there shouldn't be vibration issues
2. The freeze happens when the data piont ends w/ "00" and for an unspeicifed amount of time
3. When reviewing the data, you can see from data point 5100 to 5101 a pretty significant drop in RPM and it's that way for every data point I could remember it happening
I'm not sure what else would be helpful info. One of the forum memebers is looking at the data recording to share their thoughts but I'm still looking for an answer.
1. Laptop is in a backpack on my back so there shouldn't be vibration issues
2. The freeze happens when the data piont ends w/ "00" and for an unspeicifed amount of time
3. When reviewing the data, you can see from data point 5100 to 5101 a pretty significant drop in RPM and it's that way for every data point I could remember it happening
I'm not sure what else would be helpful info. One of the forum memebers is looking at the data recording to share their thoughts but I'm still looking for an answer.
#2976
#2977
I had to vtune. The suggested download dta044 for my application did not feel as good as the stage 1 factory download but after several vtunes it feels very good for a stage 1 103.
#2978
I finally got a mount for my iPhone so I could have a remote view of my computer screen while doing vtune runs. Yesterday was my first time out w/ the setup and something extremely annoying happened over and over and I've posted on other forums and haven't found an answer yet. While recording data, datamaster would freeze up and stop recording for a period of time and it always froze up when the data points were on a number like 5100, 5500, 6100 meaning whatever number it froze on had "00" as the last two digits. I'm not sure what's causing the issue if it's the iPhone RDP I'm using or if it's the computer.
1. Laptop is in a backpack on my back so there shouldn't be vibration issues
2. The freeze happens when the data piont ends w/ "00" and for an unspeicifed amount of time
3. When reviewing the data, you can see from data point 5100 to 5101 a pretty significant drop in RPM and it's that way for every data point I could remember it happening
I'm not sure what else would be helpful info. One of the forum memebers is looking at the data recording to share their thoughts but I'm still looking for an answer.
1. Laptop is in a backpack on my back so there shouldn't be vibration issues
2. The freeze happens when the data piont ends w/ "00" and for an unspeicifed amount of time
3. When reviewing the data, you can see from data point 5100 to 5101 a pretty significant drop in RPM and it's that way for every data point I could remember it happening
I'm not sure what else would be helpful info. One of the forum memebers is looking at the data recording to share their thoughts but I'm still looking for an answer.
look here... http://www.clearchain.com/blog/posts/how-to-use-a-belkin-f5u409f5u409-cu-usb-to-pda-serial-converter-in-visawindows-7-64bit-mac-osx-10
for the 64 bit fix.
Last edited by wurk_truk; 12-24-2011 at 11:38 AM.