Harley PN 74549-04 Tach/Speedo Indications
#1
10-30-2008, 10:40 PM
Harley PN 74549-04 Tach/Speedo Indications
I have installed a new Harley Part 74549-04 combo speedo/tach on my 2004 Fatboy.
For some reason,the mileage indication maintains energised at all times even with engine and ignition selected to off.
The backlites extinguish,but the read out always there.
I hear this may be normal on these combo units???
Any guidance on this??
I don't believe it draws much this way,but just does not seem normal.I can understand having it remain energised for some seconds after ignition off..but continuous??
Thx
Jim
ardeche07@sbcglobal.net
or PM.
For some reason,the mileage indication maintains energised at all times even with engine and ignition selected to off.
The backlites extinguish,but the read out always there.
I hear this may be normal on these combo units???
Any guidance on this??
I don't believe it draws much this way,but just does not seem normal.I can understand having it remain energised for some seconds after ignition off..but continuous??
Thx
Jim
ardeche07@sbcglobal.net
or PM.
Thread
Thread Starter
Forum
Replies
Last Post
04, 74549, 7454904, davidson, diy, harley, hd, instructions, pn, repair, replace, replacement, spedometer, speedo, speedometer, tach
