Ignition/Tuner/ECM/Fuel Injection Need advice on ignition issues? Questions about a tuner? Have questions about a EFI calibration or Fuel Injection? Tips on Engine Diagnostics, how to get codes, and what they mean. Find your answers here.

SERT Back to Stock Stage I

Thread Tools
 
Search this Thread
 
  #11  
Old 10-25-2008, 01:18 AM
deadeye's Avatar
deadeye
deadeye is offline
Road Warrior
Join Date: Feb 2007
Location:
Posts: 1,339
Received 92 Likes on 57 Posts
Default Ridemaxx Tuners

Originally Posted by ironbikeworx
*What I am planning...
I currently sell the new Ridemaxx Tuners.... Once the newer models come out for the '07's, I will be testing the unit and maps for my setup. .
When do you expect the Ridemaxx to be available for 07's? I am looking for a EFI tuner and if the Ridemaxx will be out for TC96 motors soon I will wait for it.
 
  #12  
Old 10-25-2008, 10:48 PM
RustyCor's Avatar
RustyCor
RustyCor is offline
Cruiser
Join Date: Jun 2006
Location: Cleveland, OH
Posts: 123
Likes: 0
Received 0 Likes on 0 Posts
Default

Hi! The SERT I purchased with cables is P/N 32107-01H and is dated 09/10/07. When the new SEST came out, the cables were extra.
 
  #13  
Old 10-26-2008, 01:16 PM
IndyRider's Avatar
IndyRider
IndyRider is offline
Road Captain
Join Date: Oct 2005
Location: Indianapolis, IN
Posts: 694
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ironbikeworx
Hi Folks! Have a question and need some advice. * What I'd like to do....
I have the software for the SERT, the cables, etc. Is there a way to go back to a basic Stage I w/o any tunes? I was told that if I wanted to add any tuners, that I'd have to be flashed at least back to a basic Stage 1 level.

So is there an easy solution to this? The dealer refuses to give me a copy of the last tune so I'm basically lost in that dept. Unless I can extract something. But I'd rather just tune it back to normal.

Thanks in advance..
Big-John, it is my understanding that you will need to go to the dealer and have them flash your ECM back to stock and then the Stage 1 download.

I am pretty sure you can not re-set it back to stock with the SERT.

I looked into this myself a few months back. My fuel mileage is low like yours also but the bike runs great so I decided to just pay the $$ in gas for now.

As long as I am on the highway at a steady pace I get around 40 mph. In town with normal riding I am around 32-34 MPG.
 
  #14  
Old 10-27-2008, 11:59 AM
Steve Cole's Avatar
Steve Cole
Steve Cole is offline
HD EFI Guru
Join Date: Jan 2008
Posts: 3,999
Received 3,683 Likes on 1,669 Posts
Default

The SERT stage 1 calibration is as close to the same as the dealer stage 1 calibration could ever be. You will find no differences between the two calibrations in mileage or power.
 
  #15  
Old 05-01-2009, 02:55 PM
ironbikeworx's Avatar
ironbikeworx
ironbikeworx is offline
6th Gear
Thread Starter
Join Date: Oct 2007
Location: NJ - USA!
Posts: 14
Likes: 0
Received 0 Likes on 0 Posts
Smile

Sorry about being out of touch here lately... been a hellish winter..
We have the Ridemaxx and Plus for most bikes.. I installed the plus.

I flashed my sert down to as close as possible and AMFD gave me a map to work off... Pretty interesting... I like it so far... Funny, but after I trashed the custom dyno tune from the dealer... the bike ran much better... even before the addition of the plus... go figure.
 
  #16  
Old 08-11-2009, 04:39 PM
col_kurtz's Avatar
col_kurtz
col_kurtz is offline
Advanced
Join Date: Jan 2005
Location: Fort Pierce
Posts: 91
Likes: 0
Received 0 Likes on 0 Posts
Default

The Cable is a basic DB-9 Serial cable you can buy at any store that sells computer cables. I lost my cable a long time ago and have been using one I got from work. I can only guess what HFD is charging for that.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Yeller11
Touring Models
39
03-25-2014 09:32 PM
OnTheFence
Ignition/Tuner/ECM/Fuel Injection
4
12-22-2007 06:00 PM
wb0zrd
Softail Models
1
10-21-2007 01:22 PM
dgriffith
Touring Models
9
04-29-2007 10:14 AM
dforeid
Touring Models
5
05-26-2006 07:57 AM



Quick Reply: SERT Back to Stock Stage I



All times are GMT -5. The time now is 02:25 AM.