Nightrider O2 IED's - Field Test
#911
RE: Nightrider O2 IED's - Field Test
ORIGINAL: dropone
cruiser85257, I have the IED on my bike now. I like the way they are almost invisible. My question is the extremes as small so you can hide them as well.
cruiser85257, I have the IED on my bike now. I like the way they are almost invisible. My question is the extremes as small so you can hide them as well.
[IMG]local://upfiles/50578/E564B772CAC14A11AE1F2D5881B60126.jpg[/IMG]
#914
RE: Nightrider O2 IED's - Field Test
ORIGINAL: ko4qc
What connectors did you use and where did you get them?...I was told the connectors cost about $30....:>
ORIGINAL: itsmyforte
So I built my own for under $10.
So I built my own for under $10.
#915
RE: Nightrider O2 IED's - Field Test
welcome from me to post the parts/description, and pics if you can.
Watie
Watie
ORIGINAL: itsmyforte
I purchased all my parts from mouser electronics except the wire and heat shrink tubing. though you could even buy those there too if you want. I would be happy to list the parts i got if everyone thinks its ok to post it. I don't want to step on any toes.
ORIGINAL: ko4qc
What connectors did you use and where did you get them?...I was told the connectors cost about $30....:>
ORIGINAL: itsmyforte
So I built my own for under $10.
So I built my own for under $10.
#916
RE: Nightrider O2 IED's - Field Test
I have on 08 ultra and with the temperature 78 degrees the heat coming off the engine was very hot. This is the first time riding at this temperature. I will buy and install the Nightriders O2 IED device but how difficult is it to install. Cutting wires etc. is not something I want to do.
#917
RE: Nightrider O2 IED's - Field Test
No wire cutting, have to cut some plastic tiesoff the front 02 wires, then unplug the 02 wire and plug the IED's up, then use some plastic ties to secure everything. Do not bend the IED's in the middle, where it is heaver coated, can be bent on end wires. That all there is to it.
#918