Looking for some help in troubleshooting
#11
#12
The injectors that came out were subject to a bulletin M-1185 and have been superseded by injectors with a 25 degree 6 hole injector (3.9G/S)... The ones i put in are 27709-06A, which is the correct replacement part according to the bulletin. So i assume i should be good.
Last edited by SonnyJim101; 11-11-2021 at 08:26 AM.
#13
Those are just the injectors I bought while I was waiting for the bike to arrive. I had read most people upgrade to them. I could go back to the originals... just a bit more work to take them off, etc. again.
The injectors that came out were subject to a bulletin M-1185 and have been superseded by injectors with a 25 degree 6 hole injector (3.9G/S)... The ones i put in are 27709-06A, which is the correct replacement part according to the bulletin. So i assume i should be good.
The injectors that came out were subject to a bulletin M-1185 and have been superseded by injectors with a 25 degree 6 hole injector (3.9G/S)... The ones i put in are 27709-06A, which is the correct replacement part according to the bulletin. So i assume i should be good.
Thread
Thread Starter
Forum
Replies
Last Post
aamax
Ignition/Tuner/ECM/Fuel Injection
1
10-25-2005 11:49 PM