PCIII problem - dtc?
#11
07-29-2007, 04:31 PM
Join Date: May 2006
Location:
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
RE: PCIII problem - dtc?
Now that's some good info!!! Thanks to everyone who replied. I have a few thins to check out now and I'll let you knowwhat I find.
Why wait 50 ignition cycles when there are more things I can screw up! I'll have to look into this further. Isn't technology great?
Thanks all.
Why wait 50 ignition cycles when there are more things I can screw up! I'll have to look into this further. Isn't technology great?
Thanks all.
#12
08-09-2007, 07:14 PM
Join Date: May 2006
Location:
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
RE: PCIII problem - dtc?
Ok, so I sure take a long time to follow-up. Here is the bottom line....
I checked the error codes and it was indeed a historic dtc that was generated when I plugged in the PCIII. Cleared the codes and haven't had a problem since. The ike runs very well!!!
Thanks again to everyone who responded. I couldn't have done it without your help.
-- Joe
I checked the error codes and it was indeed a historic dtc that was generated when I plugged in the PCIII. Cleared the codes and haven't had a problem since. The ike runs very well!!!
Thanks again to everyone who responded. I couldn't have done it without your help.
-- Joe
Thread
Thread Starter
Forum
Replies
Last Post
fatheadonsoftail
Ignition/Tuner/ECM/Fuel Injection
2
03-11-2006 06:21 PM