Salvaged my harness from my 07 Ultra and was trying to put it on my 10 Tri this am.When I plugged it in I only had one tail/brake light and am thinking it is because an 07 Ultra would only have 1 brake/tail.The plugs are alike but there is a wire that does not match the harness I have.Has anyone had this issue?Does anyone know who offers a 10 Tri harness?

thanks in advance,
T K

 

TK; are you sure that you are plugged into the “main harness”? There are two harness that look very similar but the one located on the left side of the trike, aft of the saddle hump dose not have full function to both sides. The “main harness” is buried in the middle and slightly forward of the saddle hump.

This is the best description I could think off, hope it helps. Please let us know how you make out.

 

Jim I could kiss you,I saw that plug and went further aft.Will try it first thing in am.

gratias,
T K

 

Thanks to Jimer it is hooked up and running.Just a simple task of plugging in to the right connection.

thanks again,
T K

 

TK, you’re welcome; glad that I could help but there ya go kissing & telling