removing muffler baffles
#1
removing muffler baffles
I have jackpot mufflers on a 07SG. I want to replace the tuned baffles with the competition baffles. Any tips on removing them? After removing the bottom bolt..I have tried heating them, loosening with a screw driver, pulling with pliers wit no luck. Any ideas? Thanks, Tom
#2
Could try a slide hammer the kind they use for pulling dents, could get one cheap at harbor freight or might be able to rent one. Or take off the muffler and use a crow bar and hammer and pound it out.
#3
I recommend removing the mufflers and driving them out from the inlet side, you can use section of pipe or a large socket
__________________
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
Thread
Thread Starter
Forum
Replies
Last Post