Got the engine guard with pegs and mounts, mounts were stripped. Trying to drill the head off, not going good. Wondering what the bolts look like when disassembled. And if I can get new bolts.

 

https://www.harley-davidson.com/stor...-07-5082907--1
They come in chrome or black

From the instructions, the bolt that is at the pivot between the clamp and the long arm is Screw (actually a hex socket cap screw), 1/2 x 1-1/4 inch (2). Not sure of thread pitch. Can probably get them at ACE or other hardware store.

 

Follow that link soupy gives, where you can download the instructions, which may tell you the screw size.