Damper rod bolt spinning
#1
Damper rod bolt spinning
2009 49mm leaking seal replacement. Done these before but have not had a damper/drain bolt spin on me. This one is.
Fork on bike, pulling downward and hitting with 1/2" impact. Bolt spins.
Fork removed drained and reassembled and compressed, hit with impact and bolt spins. not free spin, it's ratcheting but not breaking loose. Will not tighten back up either. It has not broken loose.
any other ideas?
Fork on bike, pulling downward and hitting with 1/2" impact. Bolt spins.
Fork removed drained and reassembled and compressed, hit with impact and bolt spins. not free spin, it's ratcheting but not breaking loose. Will not tighten back up either. It has not broken loose.
any other ideas?
#2
#3
Join Date: Jan 2011
Location: Southeast Michigan 15 Minutes East Of Hell
Posts: 149,201
Received 49,882 Likes
on
19,353 Posts
#4
The following users liked this post:
Uncle Larry (08-30-2017)
#5
#6
Thread
Thread Starter
Forum
Replies
Last Post
sundancewind
Frame/Suspension/Front End/Brakes
1
10-17-2007 12:25 PM