Dyno results - 05 Fatboy Anniversary
#11
RE: Dyno results - 05 Fatboy Anniversary
Thanks for the info. Looks like new cams are on the wish list now. I assume a new dyno would be in order if new cams were installed, correct? Would the PCIII need a new map?
Any ideas on a good cam for low end torque and HP?
Any ideas on a good cam for low end torque and HP?
#12
RE: Dyno results - 05 Fatboy Anniversary
New dyno run or PCIII at a minimum. For what you are describing, the 203s will probably best suit you, though 204s are an option...
A buddy here has 203s on his otherwise stock motor (he does have a stage 1 and a Mikuni carb), and his bike has a little extra kick in the low to mid range...
Hope this helps,
Mac
A buddy here has 203s on his otherwise stock motor (he does have a stage 1 and a Mikuni carb), and his bike has a little extra kick in the low to mid range...
Hope this helps,
Mac
#14
RE: Dyno results - 05 Fatboy Anniversary
Your numbers are right on. Stock 1450 hp is about 67. Considering your motor is basically stock with nice pipes and the PCIII you are doing really good. If you want big numbers your talking high compression pistons, cams and ported and polished heads. I'm running 80 hp with my 95.
Terry
Terry
Thread
Thread Starter
Forum
Replies
Last Post
TennesseeGene
Softail Models
36
08-28-2012 03:31 PM