HarleyDroid working - Logging/RPM/MPH on cell phone
#51
09-11-2012, 06:52 PM
Does that make sense?
#52
09-25-2013, 01:20 AM
Advanced
Join Date: Feb 2013
Location: New Delhi
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
#53
04-14-2014, 08:23 AM
6th Gear
Join Date: Apr 2014
Location: Phoenix
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
It's HarleyDROID not iHarley. 
I doubt Apple would ever let software like this through their stringent filtering. Google (Android) allows open-source software to go into the Play Store (Android Market.)
Here's a page that will help anyone needing cable info...
https://github.com/stelian42/HarleyD...leyDroid-cable
The ELM327 Bluetooth Module can be had from Amazon, eBay, or DealExtreme.
I doubt Apple would ever let software like this through their stringent filtering. Google (Android) allows open-source software to go into the Play Store (Android Market.)Here's a page that will help anyone needing cable info...
https://github.com/stelian42/HarleyD...leyDroid-cable
The ELM327 Bluetooth Module can be had from Amazon, eBay, or DealExtreme.
Looks like there is a new one that works wirelessly on Apple iPhones and Android called RPMitUp.
Found a youtubes and it says it does HP and torque calculations also:
#54
05-05-2014, 03:57 PM
Stage II
Join Date: Dec 2013
Location: New York
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
2014 FLHTK CAN BUS question
Here is a picture of the connectors on my 2014 FLHTK:
There are 2 possible connectors, both have more than 4-pin plug. My question is: which of the 2 plugs is the one to use to connect to the CAN BUS? Also, does anyone know the make/type of connector I need to use as well as the pinouts?
TIA.
Ron
There are 2 possible connectors, both have more than 4-pin plug. My question is: which of the 2 plugs is the one to use to connect to the CAN BUS? Also, does anyone know the make/type of connector I need to use as well as the pinouts?
TIA.
Ron
#55
05-06-2014, 04:18 AM
Advanced
Join Date: Feb 2013
Location: New Delhi
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
#56
05-06-2014, 12:14 PM
Stage II
Join Date: Dec 2013
Location: New York
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Also, is anyone on this forum familiar with the 2014 CANBUS wiring diagram or which of the 2 connectors is used for CANBUS connection?
TIA.
Ron
#57
07-25-2016, 05:01 PM
6th Gear
Join Date: Mar 2015
Location: Phoenix
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Finally got some time with a new 2016 HD Breakout that uses the CAN BUS system. We got a dashboard that can display the speed and one that can display the RPM. That's probably going to be the limit of what we can do for a while because of the amount of data that is being processed. Check it out:
Thread
Thread Starter
Forum
Replies
Last Post
