Cruise control doesn't work over 90 mph.
#13
03-31-2012 | 03:12 AM
Road Warrior
Joined: Nov 2007
Posts: 1,285
Likes: 0
From: Olympia Wa.
They are programed that way from the factory. only way to change it is to have harley reprogram the ECM. It's possible, however there is no way you will get any dealership to reprogram it above factory settings.
now slow the ***** down! I don't want to be reading your obit in the news paper!
now slow the ***** down! I don't want to be reading your obit in the news paper!
#16
03-31-2012 | 09:21 AM
Outstanding HDF Member
Joined: Jun 2006
Posts: 2,812
Likes: 0
From: Ak-Tenn
What the hell's going on here? You mean when you're tooling though Montana and you can see for freakinever that you guys don't rap it up to 100? I thought there was an adventurous spirit here. I'm NOT talking in traffic for Gods's sake either. But damn.
#17
03-31-2012 | 09:25 AM
Seasoned HDF Member
Joined: Aug 2010
Posts: 5,173
Likes: 177
From: East Coast
Was cruising on Florida's turnpike last weekend. The marked limit is 70, but traffic was flowing at 80 mph. I had cruise set at 80 mph for about an hour. At one point the traffic was very thin so I decided to roll it up via the accel button to 90+, but the fuel or ignition of something cut at 90 preventing using CC above 90. Rolling on the throttle by hand worked just fine. Does HD set em up this way or do I have a problem?
Problem? I think your dry sense of humor is great. These other folks just don't understand...
#18
03-31-2012 | 10:23 AM
Seasoned HDF Member
Joined: Sep 2007
Posts: 9,167
Likes: 341
From: Central Illinois, Between I-80 and I-74
#20
03-31-2012 | 10:46 AM
Intermediate
Joined: Jan 2012
Posts: 49
Likes: 0
From: Dahlonega, GA
