2001 a good year for TC 88?
#12
09-30-2011 | 08:14 PM
Thread Starter
|
Cruiser
Joined: Feb 2009
Posts: 101
Likes: 5
From: Alabama
The good: Forged crank and left side Timkin crank bearing. If it has a carb great.
The bad: Known for bad cam bearings and you will need to watch the tensioners. I'd go gear drive cams. The fuel injection for that year sucks ***. Rear swing arms are weak and tend to break where the axle goes through.
If it were a carbed bike I would consider it but not for that price unless it's low miles and cherry.
The bad: Known for bad cam bearings and you will need to watch the tensioners. I'd go gear drive cams. The fuel injection for that year sucks ***. Rear swing arms are weak and tend to break where the axle goes through.
If it were a carbed bike I would consider it but not for that price unless it's low miles and cherry.
#14
09-30-2011 | 09:07 PM
Outstanding HDF Member
Joined: Mar 2010
Posts: 2,202
Likes: 5
From: Hudson Valley, NY
If it's carb and 15K I would see if he'll let it go for $8500, if it's EFI just walk away.
Thread
Thread Starter
Forum
Replies
Last Post
