need a parts search done, have the #
#11
There must have been a fluctuation in the Matrix.
I just ran out to the garage and my EVO's center piece is a hair under 6.5 inches.
The round cover itself is 8". It has a recess for the center piece.
That 8" would work if you ran it bolted to the filter itself minus the stock cover, (I have the K&N filter).
I just ran out to the garage and my EVO's center piece is a hair under 6.5 inches.
The round cover itself is 8". It has a recess for the center piece.
That 8" would work if you ran it bolted to the filter itself minus the stock cover, (I have the K&N filter).
#12
Join Date: Oct 2007
Location: Springfield, Ohio
Posts: 30,914
Likes: 0
Received 15 Likes
on
12 Posts
There must have been a fluctuation in the Matrix.
I just ran out to the garage and my EVO's center piece is a hair under 6.5 inches.
The round cover itself is 8". It has a recess for the center piece.
That 8" would work if you ran it bolted to the filter itself minus the stock cover, (I have the K&N filter).
I just ran out to the garage and my EVO's center piece is a hair under 6.5 inches.
The round cover itself is 8". It has a recess for the center piece.
That 8" would work if you ran it bolted to the filter itself minus the stock cover, (I have the K&N filter).
#13
Schu,
Does this help? Second item in line.
http://barnettharley.com/harley-davi...og?start=15240
later,
ron.
Does this help? Second item in line.
http://barnettharley.com/harley-davi...og?start=15240
later,
ron.
#14
My round cover and center piece is attached to the filter itself.
EVO remember. I could run back out to the cave and look at the stock TC cover I have in a box if you want me to.
EVO remember. I could run back out to the cave and look at the stock TC cover I have in a box if you want me to.
#15
Join Date: Oct 2007
Location: Springfield, Ohio
Posts: 30,914
Likes: 0
Received 15 Likes
on
12 Posts
I'm just trying to piece together a homemade stage 1 ac kit.
The backing plate is like 20 bucks, then I'll just get a filter and a round filter cover. want to go with the v wing since the dyna has a v wing derby cover.
stage 1 on a budget so to speak.
#20
Without removing the cover to measure, I'd guess the K&N is about 7" dia. so you'd end up with a 1/2" overhang with that 8" V-Wing.
Did they list the measurement on the TC one?
Did they list the measurement on the TC one?