The grip on my throttle side came loose. The throttle still works but its a pain in the a$$ because the grip wants to keep turning when i get into it. I did not install the grips nor have I ever done any. What could be the problem here and or what holds the grips on? Someone said I probably just need to re-glue it. If thats the case what type of glue do you all recommend?

 

Throttle grip is not glued on. There's a couple screws in the clamp that tighten it to the bars. Tighten those screws and you should be fine.

 

Thanks. Will give that a try tonight

 

Not sure Ur whole throttle unit is loose or just Ur grip only..

Above fix is for the whole thing, if its just the grip then..

http://www.ehow.com/video_5538516_re...bar-grips.html

 

mine is glued had the same problem i had to squez the throttle hard to make it move, regluded and all is fine

 

Did U get her fixed,, What U'd end up doing.??

 

What type of glue is good to use for the left grip? I asked HD but the tech said they use "just regular glue" and didn't really want to give away his top secret in hopes that they can do it "for a small fee". Whatever, just need to know what kind of glue is recommended

 

cheap hair spray