G*D D**n Mother F***in Piece of Sh*T!!!!!
#11
i'm running wires through some wild 1 inc road king bars and i briefly contemplated trying to do this without removing the tank and all lines and connections. but i realized it will just add more pain, so i removed the tank completely first before going forward.
https://www.hdforums.com/forum/softa...boy-carbd.html
i have more to add, the wires had to be extended so i soldered all 12 with 16 guage primary wire extensions.
as for the main fuel line you could just take it to NAPA and they'll sell you any length for a couple bucks.
https://www.hdforums.com/forum/softa...boy-carbd.html
i have more to add, the wires had to be extended so i soldered all 12 with 16 guage primary wire extensions.
as for the main fuel line you could just take it to NAPA and they'll sell you any length for a couple bucks.
Last edited by babalu; 02-03-2011 at 07:30 AM.
#13
I never mess with anything with any plastic content in cold weather. It's too susceptible to breakage.
#15
Sometimes short cuts cause problems. I am lucky enough to have a couple of friends who are HD mechanics. I now ask them if there are any tricks or pitfalls when I go to do something I haven't done before on either of my bikes. They has saved me some potential problems and expenses through his knowledge.
Last edited by oldairboater; 02-03-2011 at 06:29 PM.
#19
It's not Coolbreeze's problem though with the heated g-rage.