Buy the manual
#12
Manual is a reference that comes in handy. Some of the advice on here is wrong. I find it faster to look up torque values or fluid levels in my manual then getting on line and typing it here most days. As far as that punch in the nose crap. Nobody's tried in a long time so the line is short without any waiting.
#13
I did just that and have one of those. Then again, I got better info on changing the oil on my Heritage from this forum when another member asked a 'stupid oil change question.'
Someone posted a link that had great instructions and pics, better than what's in the manual. Looking around the site I found information on changing the transmission and primary fluids.
http://www.dudeworld.com.au/HOWTO.ENGINE.HTML
http://www.dudeworld.com.au/HOWTO.GEARBOX.HTML
http://www.dudeworld.com.au/HOWTO.PRIMARY.HTML
My opinion is if you don't want to answer a 'stupid question,' then don't make a smartass remark either.
KISS
.
#14
On most car and truck related forums there is usually someone who has a .pdf version of the service manuals for download. You don't find that on any Harley forums that I have found. If you watch the "for sale" area of this forum sometimes you can find a manual available for half the new price.
#16
I have the manual. I think it is hard to follow, and user un-friendly. Absolutely no sense of humor either! The only thing it makes clear on every page is if you don't fix it right you are going to get hurt or die. Most of it I am never going to use, though it is interesting to see the inside of the transmission, etc, I guess. It is better as a reference tool once you already know how to do something.
I just replaced my throttle grip (first time adventure). A guy in the service dept explained how to re-adjust the throttle cables, it was easy. The manual does it a different way but before you even start you will have to find the "induction module"! Sounds a little scary right there.
It could use better pictures and more thorough instructions.
I just replaced my throttle grip (first time adventure). A guy in the service dept explained how to re-adjust the throttle cables, it was easy. The manual does it a different way but before you even start you will have to find the "induction module"! Sounds a little scary right there.
It could use better pictures and more thorough instructions.
#17
I used to get both the shop manual and Clymer for my bikes.
One would detail it slightly different enough in most cases to figure out what to do.
I've always recommended getting the shop manual even if you're all thumbs. If nothing else, the trouble shooting prior to taking it in to a dealer for work helps. Plus when asked for help on their bike, I have something to help me out.
One would detail it slightly different enough in most cases to figure out what to do.
I've always recommended getting the shop manual even if you're all thumbs. If nothing else, the trouble shooting prior to taking it in to a dealer for work helps. Plus when asked for help on their bike, I have something to help me out.
#18
I have the manual. I think it is hard to follow, and user un-friendly. Absolutely no sense of humor either! The only thing it makes clear on every page is if you don't fix it right you are going to get hurt or die. Most of it I am never going to use, though it is interesting to see the inside of the transmission, etc, I guess. It is better as a reference tool once you already know how to do something.
I just replaced my throttle grip (first time adventure). A guy in the service dept explained how to re-adjust the throttle cables, it was easy. The manual does it a different way but before you even start you will have to find the "induction module"! Sounds a little scary right there.
It could use better pictures and more thorough instructions.
I just replaced my throttle grip (first time adventure). A guy in the service dept explained how to re-adjust the throttle cables, it was easy. The manual does it a different way but before you even start you will have to find the "induction module"! Sounds a little scary right there.
It could use better pictures and more thorough instructions.
As for the OP: good point, I've fond there are some guys on here who are very helpful but more and more you get the BTFM 'tude. I've found another place I go if I need help with something.
#19
If someone posts a question, and you can help...would sure be nice if you give some advice. If you know the answer, and don't feel like responding, then don't. But there is no need to blow someone off with a snippy RTFM post.
Unless that makes you feel like a big man.
Unless that makes you feel like a big man.