I would strongly recommend fix your hog DVDs Harley shop manual. But sooner or later you will have to bring bike to shop here in TX prices are anywhere from 65 bucksa HR to 105
Good luck don't go into any shop with attitude do your homework

 

I would strongly recommend fix your hog DVDs Harley shop manual. But sooner or later you will have to bring bike to shop here in TX prices are anywhere from 65 bucksa HR to 105
Good luck don't go into any shop with attitude do your homework

 

$65@ hour for most shops around here... indy and dealerships....

I don't work for free.... and don't expect others to do so. My hourly wage, is a fraction, of what my boss charges for my time....

 

$85 here. To get a bike back with loose and missing bolts. Fogetaboutit. 3 strikes, they're out.

 

No clue what the Factory Dealers charge, because I've never wused them.
Most Indies charge $55 to $65 around here

 

60 bucks per hour in Springfield, IL...Hall's HD.

 

Richmond HD in Richmond In is $50.00 hr
Tri County HD in Faifield Oh is $65.00 hr

 

$90 here in Sunny Central FL. I think the Indys are only a bit less around $70 to $80. Of course I never pay the dealership much of anything since I do my own service and anything they have fixed was under warranty. When I do my services, I always ask myself why ANYONE would pay a dealer those fees to do it. Even though each time requires a bit more work, it doesn't take me any longer because the other stuff that is done on a normal basis goes by a little quicker from having done it repeatedly. I walked into the service department the other day to ask about getting my security code rest and I saw their "menu" of services listed by service interval. I laughed to myself when I saw that I would have had to pay them over $500 to do my 20K service which I did myself in less than half a day for the cost of my SYN-3 fluids, oil filter and a pair of spark plugs. All of which I get at 15% discount.

 

I don't see it much different than a car dealer repair shop. $85 / hour seems about right.
I agree that you should do your own work if you don't want to pay it.

 

That's cheap, it's $65 per 1/2 hour around here.