Is it possible to bend the backrest a bit

Closed Thread Subscribe

Thread Tools

Search this Thread

#11

05-06-2010 | 04:48 PM

06GliderGuy

Thread Starter

Tourer

Joined: Apr 2010

Posts: 343

Likes: 0

From: Sioux City iowa

Quote:

Originally Posted by frog13

If it's a detachable there is a post on here somewhere on how to drill and relocate the mounting bracket. Basically you drill a hole down a bit further on the bracket, angling the backrest back. The hole only moves about 3/8", but the angle difference was perfect. If I get time to find the post I'll link it here.

Thanks frog, that would be great if you could find the thread. Did some poking around and can't find it.

#12

05-06-2010 | 11:09 PM

streetglidin

Tourer

Joined: Aug 2009

Posts: 357

Likes: 1

Quote:

Originally Posted by 06GliderGuy

Yes this is the passenger backrest. And it is the standard height one. i believe there is a shorter and a taller model available. My Road Star had an angle to it, which the Mrs really liked. This one is straight up and down. It is also the quick release version.

this is the same one i have and its no were near straight up and down

#13

05-08-2010 | 08:34 AM

06GliderGuy

Thread Starter

Tourer

Joined: Apr 2010

Posts: 343

Likes: 0

From: Sioux City iowa

Streetglidin, PM sent

#14

05-08-2010 | 08:45 AM

noname

Club Member

Joined: Aug 2007

Posts: 11,192

Likes: 989

From: Hastings MN

Well you need to know that once you force the rest to move, you will weaken the integrity of the rest itself. You can't bend it and not weaken it so be aware if you do of how much pressure you may ever put on it. Noname

#15

05-08-2010 | 12:58 PM

frog13

Outstanding HDF Member

Joined: Apr 2008

Posts: 3,140

Likes: 15

From: Wisconsin

I drilled a hole between the other two on the rear mount. It moved the backrest back about an inch or so, doesn't sound like a lot, but it is. It also lowered it slightly, maybe a 1/4", no big deal. Wife is very happy.

Attached Thumbnails