Tragic loss last night
#211
Join Date: Jul 2009
Location: Danville Va, Providence NC
Posts: 2,447
Received 0 Likes
on
0 Posts
Did you ever find out anything about the insurance policy? That would be nice, get some money out of him. The way he treated you leaves a bad taste in my mouth. I would like to see him taken to the cleaners, and I don't even iknow him!
RD
RD
#212
lawyers looking into it as well as gettign a list of his assets * property, cars, bikes etc* but been told to expect at least 6 months to a year before a judgment is issued against him and then who knows how long till i actully see any $$$$
#213
Ok so what we have here is an chance to contribute to a frame up restoration of a 69 sporty for Coyo. Heres our challenge lets get this bike back on the road before the end of the summer.
Heres what we have to work with.
Good frame.
Good sheet metal.
Good bottom end/ possibly
Needs:
top end/ heads, jugs. pistons/rings. rods, rockers.
carb
distributor
front end.
rims and tires.
chain/ sprokets
handle bars and all controls.
wiring harness
lights
seat
brake lines
clutch cable/ cluch parts.
foot pegs
Im sure I am missing a lot in this list but lets get the parts rolling.
Come on Men time to go through the garage and pull out those parts that have been sitting on the shelf for years so we can help out a good man get back on two wheels again. Keep an eye on the swap meets. Lots of good parts out there to be had.
Lets get the ball rolling.
Heres what we have to work with.
Good frame.
Good sheet metal.
Good bottom end/ possibly
Needs:
top end/ heads, jugs. pistons/rings. rods, rockers.
carb
distributor
front end.
rims and tires.
chain/ sprokets
handle bars and all controls.
wiring harness
lights
seat
brake lines
clutch cable/ cluch parts.
foot pegs
Im sure I am missing a lot in this list but lets get the parts rolling.
Come on Men time to go through the garage and pull out those parts that have been sitting on the shelf for years so we can help out a good man get back on two wheels again. Keep an eye on the swap meets. Lots of good parts out there to be had.
Lets get the ball rolling.
#214
your bike loss...
I just caught up with the thread, read the first and last of the posts so I don't know all that is going on, I just know that I would be CRUSHED if my Deuce was lost like that. Hang tough! Hope things get better!
#216
that's it in a nutshell...
well, that's the bike half of the story.
the other half is coyote's shifty mechanic friend and his insurance issues.
to catch you up on that, coyote has a lawyer pursuing the shop owner to see what possible action can be taken against the shop owner with no insurance.
#217
just read the post above you.
that's it in a nutshell...
well, that's the bike half of the story.
the other half is coyote's shifty mechanic friend and his insurance issues.
to catch you up on that, coyote has a lawyer pursuing the shop owner to see what possible action can be taken against the shop owner with no insurance.
that's it in a nutshell...
well, that's the bike half of the story.
the other half is coyote's shifty mechanic friend and his insurance issues.
to catch you up on that, coyote has a lawyer pursuing the shop owner to see what possible action can be taken against the shop owner with no insurance.
#219
Ok so what we have here is an chance to contribute to a frame up restoration of a 69 sporty for Coyo. Heres our challenge lets get this bike back on the road before the end of the summer.
Heres what we have to work with.
Good frame.
Good sheet metal.
Good bottom end/ possibly
Needs:
top end/ heads, jugs. pistons/rings. rods, rockers.
carb
distributor
front end.
rims and tires.
chain/ sprokets
handle bars and all controls.
wiring harness
lights
seat
brake lines
clutch cable/ cluch parts.
foot pegs
Im sure I am missing a lot in this list but lets get the parts rolling.
Come on Men time to go through the garage and pull out those parts that have been sitting on the shelf for years so we can help out a good man get back on two wheels again. Keep an eye on the swap meets. Lots of good parts out there to be had.
Lets get the ball rolling.
Heres what we have to work with.
Good frame.
Good sheet metal.
Good bottom end/ possibly
Needs:
top end/ heads, jugs. pistons/rings. rods, rockers.
carb
distributor
front end.
rims and tires.
chain/ sprokets
handle bars and all controls.
wiring harness
lights
seat
brake lines
clutch cable/ cluch parts.
foot pegs
Im sure I am missing a lot in this list but lets get the parts rolling.
Come on Men time to go through the garage and pull out those parts that have been sitting on the shelf for years so we can help out a good man get back on two wheels again. Keep an eye on the swap meets. Lots of good parts out there to be had.
Lets get the ball rolling.
I have the mid control take offs.
I have alot of 'stuff' left over from my 103" conversion, lots of engine 'guts'. I'll have to look to see what i have. If he rebuilds with a V-twin he can have my rocker box covers too.
#220
true LOL
i feel sorry for him though every june the crew i run with throws a big private party and he's usually there, well so are all the guys who had bikes at his shop. i dont think hes gonna be attending this years party and if he shows i dotn think hes gonna be stayin long LOL
i feel sorry for him though every june the crew i run with throws a big private party and he's usually there, well so are all the guys who had bikes at his shop. i dont think hes gonna be attending this years party and if he shows i dotn think hes gonna be stayin long LOL