BrightAssLights
#31
Oh yeah...it's worth every nickel of that $200. Everyone from fellow riders from cagers comment on how bright and attention getting that BAL-1 tail light is. Installs in about 3 minutes if you take your time!
#32
Have the BAL and the headlight modulator. Had a cop stop me and ask me about the headlight. Said he wanted to let his kid know about it as he said I was very visable. Pricey but worth every penny
#35
The hubby was talking about putting them on our bikes. We were at the dealership last night and they had one on display. I saw it from the front of the store to the end of the store. Yeah it is bright and I really like the light show that it puts on when you step on the brake. Kinda like a strobe light, reminds me of my youth in the 60's. Good $hit!!!.
We will be putting these on the bikes as soon as we can. Have to come up with the ging for two bikes. May put it on the hubbys Dyna Wide Glide first as his tail lights are not as visable as the ones on my Heritage Classic.
We will be putting these on the bikes as soon as we can. Have to come up with the ging for two bikes. May put it on the hubbys Dyna Wide Glide first as his tail lights are not as visable as the ones on my Heritage Classic.
WOW, ya mean there is life AFTER 60???? YAHOO, there's hope for me, YET!!!!
C ya in ALGONA, Sharon!!!!!
#36
Well, since you're here on the interwebz you may have heard of this new thing called GOOGLE. All the kool kidz r using it. That and some closer attention to what you're reading (bright *** lights) will get you to their web site. As they say, give a man a website and he'll click on it, teach a man to search and he'll find ****.
www.brightasslights.com
www.brightasslights.com
#38
Just finished the install
Tools Needed: A phillips screw driver.
Remove the two screws. Remove tail light. Save screws. Unplug light and remove. Instructions say either use the old gasket (which is crushed) or use the supplied gasket (which I did). Plug in Badasslight and remount. Took me 5 minutes, including photos.
Turn on ignition. Use supplied zip tie to set front brake. Take supplied magnet and place it in the upper right corner of the light (which is marked on the plastic shipping cover) and you can change the intensity and flash pattern. Click on thumbnails below.
Remove the two screws. Remove tail light. Save screws. Unplug light and remove. Instructions say either use the old gasket (which is crushed) or use the supplied gasket (which I did). Plug in Badasslight and remount. Took me 5 minutes, including photos.
Turn on ignition. Use supplied zip tie to set front brake. Take supplied magnet and place it in the upper right corner of the light (which is marked on the plastic shipping cover) and you can change the intensity and flash pattern. Click on thumbnails below.
Last edited by aeronautic1; 07-02-2009 at 06:41 PM.
#39
they have one daytime video here,
http://www.brightasslights.com/site/...ideo-test.html
i dont think id want this going off in my face on a dark night.
http://www.brightasslights.com/site/...ideo-test.html
i dont think id want this going off in my face on a dark night.
#40
As a "victim" of LVIGUYS's BRIGHTASSLIGHTS I can verify that they are very BRIGHTASSLIGHTS and I don not enjoy following him on rides during the evening hours.
On the other side of the coin, I will be buying one myself.
On the other side of the coin, I will be buying one myself.