Round Air Cleaner on Twin Cam (pics)
#21
RE: Round Air Cleaner on Twin Cam (pics)
You can always run an open air cleaner and just put a center cover on it, either one like this or a stocker from HD.
[IMG]local://upfiles/1981/F578B6C93C06454F93693390BA3AD204.jpg[/IMG]
[IMG]local://upfiles/1981/220DA4E6467E4B4C98EE48F7F34FF854.jpg[/IMG]
[IMG]local://upfiles/1981/0CE47C770F674CE8AA5C31D8E5D78D40.jpg[/IMG]
[IMG]local://upfiles/1981/F578B6C93C06454F93693390BA3AD204.jpg[/IMG]
[IMG]local://upfiles/1981/220DA4E6467E4B4C98EE48F7F34FF854.jpg[/IMG]
[IMG]local://upfiles/1981/0CE47C770F674CE8AA5C31D8E5D78D40.jpg[/IMG]
#22
RE: Round Air Cleaner on Twin Cam (pics)
I like the football as well though I've got a Screamin' Eagle teardrop on mine. The round one looks like a kawasaki or something
#23
RE: Round Air Cleaner on Twin Cam (pics)
ORIGINAL: fl_799
If some of you 'ol timers out there never quite gotten used to the football aircleaner like me, HD part number 29138-91 is a bolt on for TC's with the SE air cleaner kit and is an updated version of the classic panhead unit. Retail is $45.
If some of you 'ol timers out there never quite gotten used to the football aircleaner like me, HD part number 29138-91 is a bolt on for TC's with the SE air cleaner kit and is an updated version of the classic panhead unit. Retail is $45.
"Also fits all '99-later Twin Cam models equipped with Screamin' Eagle® High Flow Air Cleaners when installed with Gasket Kit P/N 29591-99 (sold separately)."
#24
RE: Round Air Cleaner on Twin Cam (pics)
Wow, this thread took off.
I didn't need any gasket, just bolt 'er up and go.
I wish I could get this cleaner cover in an repro pan style bar and shield cover in a 7" version and mod up an EVO 6" reverse taper K&N element for the twin cam. If anybody has a line on such a setup, drop me a line. I like the factory 8" kit but the 7" would really 'have it'.
I didn't need any gasket, just bolt 'er up and go.
I wish I could get this cleaner cover in an repro pan style bar and shield cover in a 7" version and mod up an EVO 6" reverse taper K&N element for the twin cam. If anybody has a line on such a setup, drop me a line. I like the factory 8" kit but the 7" would really 'have it'.
#25
RE: Round Air Cleaner on Twin Cam (pics)
This is a joker cover I've got on mine , a little pricey , but it is chrome billet . Like it better than the football , you can see the motor better , why cover up factory chrome ?
Dan
[IMG]local://upfiles/3052/04C94F2EF7204203834218E0A93D7C5F.jpg[/IMG]
Dan
[IMG]local://upfiles/3052/04C94F2EF7204203834218E0A93D7C5F.jpg[/IMG]
#27
RE: Round Air Cleaner on Twin Cam (pics)
Here's a knock off that looks like a pretty good deal.
http://www.powersportrider.com/CGI-B...6C&catpage=495
How much is the Harley one?
http://www.powersportrider.com/CGI-B...6C&catpage=495
How much is the Harley one?
#29
RE: Round Air Cleaner on Twin Cam (pics)
I put mine on without the gasket but it did'nt seat well, only the screw held it straight. With the gasket it mounts firmly and wont twist around.
ORIGINAL: hd_sob
Did you really need this gasket?
"Also fits all '99-later Twin Cam models equipped with Screamin' Eagle® High Flow Air Cleaners when installed with Gasket Kit P/N 29591-99 (sold separately)."
ORIGINAL: fl_799
If some of you 'ol timers out there never quite gotten used to the football aircleaner like me, HD part number 29138-91 is a bolt on for TC's with the SE air cleaner kit and is an updated version of the classic panhead unit. Retail is $45.
If some of you 'ol timers out there never quite gotten used to the football aircleaner like me, HD part number 29138-91 is a bolt on for TC's with the SE air cleaner kit and is an updated version of the classic panhead unit. Retail is $45.
"Also fits all '99-later Twin Cam models equipped with Screamin' Eagle® High Flow Air Cleaners when installed with Gasket Kit P/N 29591-99 (sold separately)."
Thread
Thread Starter
Forum
Replies
Last Post