How do you place medallion over screw on back of sissy bar? Screw for pad not flush. Saw same medallion at dealer on another bike that covered screw. Self-stick medallion.
&nbsp\\;
Howard

 

I thought that was screwy too, when I had my Fatboy.&nbsp\\; I ended up using 3M double sided tape and cutting out the center to allow just enough room for the screw head.
&nbsp\\;

 

The bar i got&nbsp\\; had&nbsp\\; a recess for screw&nbsp\\; to fit&nbsp\\; in. And madallion fit flush.

 

Go to a flush mounting screw .you may need to take a larger size drill bit and bevel the hole just a bit so a flush mounting screw will fit completly flush.Thats what I did anyway.

 

Never had any luck with self stick stuff. Hope it doesn't nick ur fender when it falls off!!

 

&nbsp\\;
&nbsp\\;
my sissy bar has a countersunk hole that uses a beveled bolt to attach the pad.&nbsp\\; The HD stick on medallion attaches easy with the tape/adhesive that it has.&nbsp\\; No problems, it is really on there and ain't coming off.&nbsp\\; Have a similar medallion attached with the same tape on my pull behind trailer and it is firmly attached.&nbsp\\; 15k on the bike with no indication that the medallion is loosining up.

 

&nbsp\\;
Me too.&nbsp\\; HD bar and medallion.
MikeM

 

I use velcro, when you want to get at that screw just pull off works great.

 

&nbsp\\;
Same here the screw in my bar is recessed, medallion fit just fine and has&nbsp\\;been on for over a year with no worries.

 

Yer bar maybe on backwards. The counter-sunk hole shiould be on the back.
My Sporty's was on backwards when I bought it.