Ok, I know this probably should be a no brainer but here goes. I've worked around cars pretty much since old enough to know what a wrench was. I bought the Smart Siren for my bike last weekend and read the instructions. Removed the "right side cover" as related to sitting on the bike. I did this since the "right side" of a car is referring to the passenger side as sitting in the driver's seat, thinking it was the same on a motorcycle. Ended up having to pull the "left side cover" to find the connector and placement slot. lol Was this a typo or what?

My question is, is the right side the "brake side" of the bike or the "shifter side" of the bike. I've got the pipes and all from Fuel Moto and going to install tonight. Since the pipes are side specific (per Jamie, due to the custom baffle packing), I don't want to switch it up. Which is left and which is right side???????????????????????????

Ok, I'm ready for all the smartass answer's and deserve it. lol

 

Ask your dealer

 

You do it from the back of the bike....left side - clutch, right side - brake.............and no smarta$$ answer....



..............but I was tempted

 

Left and Right is always from the seated position just like a cage.

 

When you get the left vs right figured out, we'll work on clockwise vs counter clockwise. Is it clockwise when you're looking at the clock from the front or from the back of the clock? LOL

 

Then I guess the instructions for the Smart Siren were wrong then. Right? lol

 

I'd ask Jamie to make sure.

 

Or it for the wrong bike. (see dealer)

 

My smart siren on the 03 went on the right side, brake side.

 

Ask Big Bird