Mini-Beast Air Horn
#21
01-13-2006, 01:11 PM
RE: Mini-Beast Air Horn
ORIGINAL: Beeracuda
I hope it will. I just ordered one and that's where I'm planning on putting it. I'll let you know after I get it.
Monty
ORIGINAL: Ram
I've been thinking of the Mini-Beast A/horn but don't want to spring for it just yet, since I have the cylinder cooling fan to install and have to relocate the existing horn! Have not even taking it out the box, but suspect that the stock horn goes below the forks now on the down tubes of the frame??
My question is, will the Mini-Beast go in that spot too?
I've been thinking of the Mini-Beast A/horn but don't want to spring for it just yet, since I have the cylinder cooling fan to install and have to relocate the existing horn! Have not even taking it out the box, but suspect that the stock horn goes below the forks now on the down tubes of the frame??
My question is, will the Mini-Beast go in that spot too?
Monty
What ever you find out please! Keep me in mind.
Thanks,
Gary
#22
01-13-2006, 02:04 PM
RE: Mini-Beast Air Horn
Gary,
I will do it! I'll even post some pics, if I get my camera figured out.
I took a bunch of pics of old racecar stuff that I was going to put on ebay and when I hooked it up to the computer, nothing. [sm=oopssign.gif] [sm=smiley35.gif]I think I know what I did wrong, though. My new video camera will also take stills and that's what I was trying to use. This weekend I'm going to try again and check to see they are there before I leave. My partner has the parts and we are 350 miles apart....
I will do it! I'll even post some pics, if I get my camera figured out.
I took a bunch of pics of old racecar stuff that I was going to put on ebay and when I hooked it up to the computer, nothing. [sm=oopssign.gif] [sm=smiley35.gif]I think I know what I did wrong, though. My new video camera will also take stills and that's what I was trying to use. This weekend I'm going to try again and check to see they are there before I leave. My partner has the parts and we are 350 miles apart....
#23
01-25-2006, 11:21 AM
RE: Mini-Beast Air Horn
Well, I got my mini-beast. It doesn't look like it will fit where I wanted it to go. It's comes to close to the fender. I don't know that it would hit, but I'm not going to take a chance. I am going to fab a bracket and mount it between the front uprights on my FXRS.
I'll upload pics when I'm done. It will probably be next week.
I'll upload pics when I'm done. It will probably be next week.
#24
01-25-2006, 12:08 PM
RE: Mini-Beast Air Horn
ORIGINAL: SMenasco
No. If it did, I'd probably want to start shutting down something, a hatch, engine, etc. The only way I can describe it is that it goes BLAAAAAAAAAAA and BLEEEEEEEE at the same time
[IMG]local://upfiles/1638/129F3CBBBEA840D78EF3456AA1B5B90A.jpg[/IMG]
No. If it did, I'd probably want to start shutting down something, a hatch, engine, etc. The only way I can describe it is that it goes BLAAAAAAAAAAA and BLEEEEEEEE at the same time
[IMG]local://upfiles/1638/129F3CBBBEA840D78EF3456AA1B5B90A.jpg[/IMG]
#25
01-25-2006, 02:06 PM
Join Date: Mar 2005
Location:
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
RE: Mini-Beast Air Horn
I'm almost afraid to use it in traffic. It's so loud, it might make some lady on a cell phone hang up and target me; either that or give some old person (older than me) a heart attack. It will definitely get your attention.
[IMG]local://upfiles/1638/6C049349ACBA414E9BE6F690D06C5EBF.jpg[/IMG]
[IMG]local://upfiles/1638/6C049349ACBA414E9BE6F690D06C5EBF.jpg[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
