I have a 6x12 vnose low hauler style trailer with flat sides (no rivetes) ,gravel guard , set up with three pingels so you can haul 2 bikes or one .If you have any interest . I'm in nc but the cash you can save might pay for the gas to come git it . I'll take $2k cash . This trailer sold new for $3500 . If you would like pictures let me know . The trailer has a double dove tall in the back so clerance is not a problem . I put my 10' custom in it and it sets 3.5 ' of the ground .

 

It will also fit in a garage !

 

Had a 6x10 Haulmark enclosed ttailer and towed like a dream. If possible try to get one with a side access door and drop down rear ramp, you;ll be glad ya did !

[IMG]local://upfiles/39392/38A988D27DD744D89F219109611FE3F7.jpg[/IMG]

 

I wouldn't own one that didn't have a side door and a ramp door . That is good advice !

 

We offer wide selections of affordable Motorcycle Trailers. You can build your own sides with the stake pockets that we also carry to build your own enclosed trailer at a fraction of the cost.





Check out our Vendor Section HEREor click our signature link for pricing and details.

HAPPY HOLIDAYS!

 

You looking to buy one Tony? Menards, Home Depot, Lowes, TSC, Fleetfarm just to start. There are plenty of places in the area that sell and rent trailers. (I'm in Albert Lea)

 

I Measured my '08 FLHTCU and from the tip of the chrome on the front bumper to the tip of the rear tourpack I got 103". I ended up buying a '08, 12' Pace American alum enclosed trailerfor $3640. And another $110 for spare tire/wheel. What can I say, I paid $21,800 for the bike andI darn sure want a quality enclosedtrailer to move it in and provide protection and securityfor it while hauling. There is no way an 8' trailer would work unless I removed the tour pack.

JT Cycle package includes:
[*]Torsion axles with 14" bias ply tires[*]3/4" plywood floor (SA’s)[*]3/8" plywood walls (SA’s)[*]4 D-rings[*]Medium-duty ramp door[*]Light-duty corner post drop down jacks[*]Plate for wheel chock[*]Flow through vents[*]24" beavertail (7' wides)[*]Extra plates for D-rings and wheel chock (7' wides)[*]6" extra height (5' /6' wide SA’s) [/ul]