Hi,

I need two measurements from a saddlebag that would be on a police edition road king. Both would be taken on the "puck" **** on the bag. One measurement would be the diameter, and the other would be the thickness/height of the ****. Measurement would be best if taken with calipers...but a real good measurement with a ruler will work as well. Thanks
See below for example:

 

Hoytheld:
checked my '04 road king police and the puck dimensions are as follows:
diameter = 2.75 in
height = .75 in
checked with calipers for diameterand depth guage for height, (could not remove puck).
hope this helps.

btw: what's up are you fabicating something of interest to us police bike riders?
ride safe
mjh

 

yes...when the prototype is done...I will post the results. Thanks for the measurements

PS...it's not a new thing...just somehing to complement a pieceI already fab for the police bike/road king

 

I'l bet it's a neblar plasmatic stabilizer.

 

sounds like a gadget two homo's would use on each other to me.....no...I am sure it's not one of those...